Loading ...
Loading ...
Loading ...
30
30°
30°
3m
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
30°
3m
(approx.)
About the remote control signal
The remote control works with
the projector’s remote sensor.
This projector has two remote
sensors on the front and back
sides.
The sensors can sense signals
within the following range:
60 degrees (30 degrees to the
left and right of the sensor)
within about 3 meters.
• You can deactivate one of the sensors using the REMOTE RECEIV.
item in the SERVICE menu of the OPTION menu (95).
• The remote control signal re ected in the screen or the like may be available.
If it is dif cult to send the signal to the sensor directly, attempt to make the
signal re ect.
• The remote control uses infrared light to send signals to the projector (Class 1
LED), so be sure to use the remote control in an area free from obstacles that
could block the remote control’s signal to the projector.
• The remote control may not work correctly if strong light (such as direct
sun light) or light from an extremely close range (such as from an inverter
uorescent lamp) shines on the remote sensor of the projector. Adjust the
position of projector avoiding those lights.
NOTE
Remote control
Loading ...
Loading ...
Loading ...