1. Home
  2. Electrolux
  3. Electrolux ERHC1238S User Manual
  4. Page 9

User Manual - Page 9

For ERHC1238S.

Loading ...
Loading ...
Loading ...
9
Filter Latch
Lockpin
MAINTENANCE AND CLEANING
WARNING!
Before maintenance or cleaning is carried out,
the canopy cooker hood should be disconnected
from the main power supply. Ensure that the cooker
hood is switched off at the wall socket
and the plug removed.
WARNING!
External surfaces are susceptible to scratches and
abrasions, so please follow the cleaning instructions
to ensure the best possible result is achieved without
damage.
stainless steel surface
Theseinstructionsmustbefollowedtoavoidarerisk.
Cleanstainlesssteelsurfacesusingnon-abrasivecleaning
productsthatarespecicallyforuseonstainlesssteel.
To ensure best results also use an even pressure and
follow the grain of the stainless steel. Use of a soft cloth
reduces the risk of scratching. If the cloth is wet ensure
that a dry soft cloth is used to wipe down the surface
again reducing the risk of any surface rust appearing.
cleaning grease filters
Thelterscanbecleanedbyhandordishwasher.After
cleaningensuretheltersarecompletelydrybefore
retting.Greaseltersmustberemovedeveryfourweeks
(maximum)forcleaningtoreducetheriskofre.
• ByhandSoakinwarmwaterandsomewashingup
liquid. For stubborn grease stains use a soft nylon
brush to help remove these stains.
• InadishwasherEnsurethatplacementofthe
ltersismadesoastonotimpedethefunctionof
thedishwashersprayarm.Washingtheltersin
a dishwasher may cause discolouration over time
although it will not effect their performance.Filters
should be washed separately to crockery and other
kitchen utensils.
removing filters
Removeltersbypullingdownthelatchtodisengagethe
lock pins. (Fig. A)
Aslockpinsaredisengagedpullthelterslightlytoward
youandthenliftthelterupslightlytoclearthebottom
ltersupportpanel.(Fig.B)
removing filter support panels
Toremovebottomltersupportpanel,holdthepanelat
each end and lift, then push the panel in. (see arrows in
Fig. C). This will disengage the panel support pins to allow
removal of the panel (Fig. C)
Do not use the cooker hood without
filters installed.
Do not clean the canopy cooker hood with water
using a hose or high pressure cleaner.
Fig.A
Fig. B
Fig. C
1
Lift
2
Push in
3
Remove
inner panels and trough
After each use the inner panels and trough should be
wipedcleanwithnon-abrasivecleaningproductsto
prevent excessive build up of oils/grease.
WARNING!
Beware of edges
Bottomlter
support panel
Outerlter
Innerlter
1
2
3
Bottom
lter
support
panel
Loading ...
Loading ...
Loading ...