Loading ...
Loading ...
Loading ...
2120
10. Zero Positioning of Chronograph
Second Hand
When resetting the chronograph, if the chronograph second hand does not
return to the 0 seconds position or if the chronograph second had has shifted
out of position due to strong impact, perform zero positioning of the
chronograph second hand according to the procedure described below.
• In the case the crown is of the screw-lock type, loosen the screw before
operating the crown.
• The zero positioning procedure cannot be performed while the insufficient
charging warning feature is activated (while the second hand is moving at 2-
second interval movement due to the watch being insufficiently charged).
Sufficiently charge the watch and check that the second hand is moving at 1-
second interval movement before performing the zero positioning procedure.
[Chronograph Second Hand Zero Positioning]
1. Pull the crown out to the time correction
position.
2. 1) Press button (A) for 3 seconds or
more and release it, the watch enters
the chronograph second 0 position
correction mode.
2) Press button (A) to position the
chronograph second hand at the 0
position.
• The chronograph second hand can be
advanced one second at a time (in the
clockwise direction) each time button
(A) is pressed.
• The chronograph second hand can be advanced rapidly by depressing
button (A) continuously.
3. Once the chronograph second has been positioned at the 0 position, reset
the time and return the crown to the normal position.
4. Press button (B) to check that the chronograph minute hand has been reset
to the 0 position.
8
Chronograph second hand
Button (A)
Time
correction
position
Button (B)
Chronograph minute hand
Loading ...
Loading ...
Loading ...