Loading ...
Loading ...
Loading ...
ASSEMBLY
ATTACH CLUTCH CABLE (See Fig. 6)
• Hook end of clutchcable through hole in control bar
bracket.
CONTROL BAR
BRACKET
CONTROL
BRACKET
END OF CLUTCH
CABLE
FIG. 6
CONNECT SHIFT ROD (See Fig. 7)
• Insert end of shift rod intohole of shift lever indicator.
• Insert hairpin clip through hole of shift rod to secure.
SHIFT HAIRPIN SHIFT
CLIP LEVER
INDICATOR
FIG. 7
REMOVETILLER FROM CRATE
• Make sure shift lever indicator is in "N" position (See
Fig. 7)
• Tilt tiller forward by lifting handle. Separate cardboard
cover from leveling shield.
• Rotate tiller handle to the right and pull tiller out of
carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at the factory for
shipping purposes. Correct and equal tire pressure is
important for best tilling performance.
• Reduce tire pressure to 20 PSI (1.4 kg/cm2).
HANDLE HEIGHT
• Handle height may be adjusted to better suit operator.
(See "TO ADJUST HANDLE HEIGHT" in the Service
and Adjustments section ofthis manual).
6
Loading ...
Loading ...
Loading ...