Loading ...
Loading ...
Loading ...
8
4. Attach the canister to the gun, plug in the cord.
5. Spray the solution through the gun for 2 or 3
seconds in a safe area. Unplug tool and trigger
the spray gun so that the material inside the
spray gun flows back to canister. Wipe the
exterior of the cup and gun until clean.
6. Unscrew nut, air cap, nozzle, pickup tube. (If
there is any paint within the see-through check
valve tube, teardown the check valve for
cleaning.)
7. Clean the canister
, pickup tube, air cap, nut
and nozzle with a cleaning brush and
appropriate cleaning solution.
IMPORTANT: Never clean nozzle or air channel
in the spray gun with sharp metal objects. Do not
use solvents or lubricants containing silicone.
8. Twist and separate the spray
gun from the handle. Clean
the rear of the spray gun (a)
with the appropriate cleaning
solution. Use a thin layer of
petroleum jelly to lubricate
the O-ring (b).
9. Dry all parts thoroughly.
10.Place a drop of ho
usehold oil into the inside of
the sprayer from the hole for assembling the
spray tip.
11.Reassemble spray gun
Note: Spray nozzle can only be assembled in one
direction that the notch of the nozzle must align
with the skirt on spray unit housing.
Note: The spray tip must be assembled in the
sprayer with the bumps on the spray tip in vertical
direction.
Note: Assemble the pickup tube by firmly pushing
them onto the inlet in the spray.
Attention!
The check va
lve muse be put back in place by
right direction with nipper point upward.
Otherwise, tool might get slog very easily. If
check valve is damaged or missing, please
replace with new one （3x included）
MAINTENANCE
Use only mild soap and damp cloth to clean
the power unit.
Never let any liquid get inside the power unit.
Never immerse any part of the power unit
into a liquid.
Important! To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment (other than those listed
in this manual) should be performed by
authorized service centers or other
qualified service personnel, always
using identical replacement parts.
The power unit contains was
hable / reusable
filter. Check the filter before and after each
use. If dirty, wash with warm water and
allow to air dry before re-installing or replace
it if it is excessively dirty by below two steps.
1. Press at the middle tap area on each
side of filter cover as arrow pointed to
Loading ...
Loading ...
Loading ...