Hotpoint HUG61K Ultima Cooker - Black

User Manual - Page 24

For HUG61K.

PDF File Manual, 28 pages, Read Online | Download pdf file

HUG61K photo
Loading ...
Loading ...
Loading ...
24
GB
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Care and Cleaning
BURNER MAINTANANCE INSTRUCTIONS
Before cleaning the burners ensure the appliance
is switch off and isolated from the electriacl supply
and the appliance is cold.
MAIN OVEN
When the main oven is used regularly, its burner is
susceptible to being covered with grease and dirt.
This might result in problems with the burner’s
ignition as well as the uneven or disappearing
flame.
To solve the problem clean the burner with a small
amount of water- diluted cleaner (e.g. CIF) using a
small brush (e.g. a toothbrush). After cleaning wipe
the burner with a cloth to remove the detergent
waste and let it dry for at least 2 hours.
WARNING!
1. Brush the burner in the directions indicated
below.
2. DO NOT re-ignite the burner with the
detergent residue.
TOP OVEN/ MAIN OVEN
When the Top oven/grill is used regularly, its burner
is susceptible to being covered with grease and
dirt.
This might result in problems with the burner’s
ignition as well as the uneven or disappearing
flame.
To solve the problem clean the burner with a small
amount of water- diluted cleaner (e.g. CIF) using a
small brush (e.g. a toothbrush). After cleaning wipe
the burner with a cloth to remove the detergent
waste and let it dry for at least 2 hours.
WARNING!
1. Brush the burner in the directions indicated
below.
2. DO NOT re-ignite the burner with the
detergent residue.
unscrew the two screws and take off the shield
protecting the burner (in main oven burner only).
Before cleaning, to reach the burner easily
Side and rear catalytic liners
These are panels coated with a special
enamel, which is able to absorb the fat
released by food as it cooks. This enamel is
quite strong, so that the various accessories
(racks, dripping pans, etc.) can slide along
them without damaging them. White marks
may appear on the surfaces; these are not a
cause for concern. Nevertheless, the following
should be avoided:
- scraping the enamel with sharp objects (a
knife, for example);
- using detergents or abrasive materials.
Side and rear catalytic liners Side and rear catalytic liners Side and rear catalytic liners Side and rear catalytic liners Side and rear catalytic liners Side and rear catalytic liners
Loading ...
Loading ...
Loading ...