Loading ...
Loading ...
Loading ...
16
TION INSTRUCTIONS
IMPORTANT!
All connections must be checked for leaks.
Ensure 1/4” (6mm) tubing is routed away from sharp
objects, sharp corners (beware of kinking the tube as
this will stop water flow), clear of the refrigerator rear
compartment and not in a location where it can be kinked
or squashed.
Ensure all push-fit connections are firmly pushed into place.
The tube should push in 5/8” (16mm) before reaching the
stop.
If tubing is removed at any point, re-cut the end and re-insert. Tubing must be fully
inserted to avoid leaks.
To remove tube from connection points first turn off the isolating faucet. Gently push
the dispensing pad a few times using a glass or container to remove the static line
pressure. Push in the collet firmly while pulling back on the tubing at the same time,
as shown in Diagram11.
Certified by: IAPMO R&T against NSF/ANSI Standards 43, 53, 401 and CSA B4831.1 for
the reduction of claims specified on the performance data sheet and at iapmort.org.
847200 compounds certified under NSF/ANSI 401 have been deemed as incidental
contaminants/emerging compounds. Incidental contaminants are those compounds
that have been detected in drinking water supplies at trace levels. While occurring at
only trace levels, these compounds can affect the public acceptance of drinking quality
water.
Rated capacity
847200 – 102 gallons (386 liters)
847201 – 170 gallons (643.5 liters)
Diagram 11
Loading ...
Loading ...
Loading ...