Loading ...
Loading ...
Loading ...
PausingorRestarting
1. To pause the washer at any time, select PAUSE/CANCEL
2. To continue the cycle, select HOLD TO START (for
approximately 1 second).
ChangingCycles,OptionsandModifiers
Not all Options and Modifiers are available with allcycles. Cycles,
Options and Modifiers can be changed anytime before HOLD TO
START is selected.
Options and Modifiers can be changed anytime after HOLD TO
START is selected and before the start ofthe selected Option or
Modifier.
To cancel a cycle and select a new cycle
1. Select PAUSE/CANCEL twice.
2. Select desired cycle.
3. Select the desired OPTIONS.
4. Select HOLD TO START (for approximately 1 second) to
restart the washer at the beginning of the new cycle.
To cancel a cycle
1. Select PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
NOTE: Ifthe water level or the temperature istoo high, the
washer will drain automatically before the door unlocks.
To change Options or Modifiem after the cycle has started
1. Select PAUSE/CANCEL
2. Select the dasirsd OPTIONS or MODIFIERS.
3. Select HOLD TO START (for approximately 1 second) to
continue the cycle.
To drain the washer manually
1. Select PAUSE/CANCEL
2. Select DRAIN/SPIN.
3. Select HOLD TO START (for approximately 1 second) to
begin the drain.
4. When the spin is complete, the door unlocks. Items can be
removed from the washer.
StatusLights
These lights show which portion of the cycle the washer is
operating. They also indicate when you can add an additional
item to the wash cycle and when the controls are locked.
Status
• Adda Garment
eSoak
SWash
• Rinse
e RinseHold
esp_
eC_eComp_
• ControlLod(ed
Adding items
You can add items to the washer after the cycle has started for
Whitest Whites, Heavy Duty, and Normal/Casual, ifthe ADD A
GARMENT status light is glowing.
To add items
1. Select PAUSE/CANCEL The washer door unlocks, and Items
can be added.
2. To continue the cycle, cloas the door and salect HOLD TO
START (for approximately 1 second).
Cycle Complete
The cycle complete light stays on for 5 minutes after the cycle is
complete, and then the washer shuts off.
Locking controls
The Control Lock prevents unintended use ofthe washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled except for PAUSE/CANCEL and
START. You can lock the controls while the washer is operating.
To lock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds.
• L_._sr
• Softer
soft
©
The CONTROL LOCKED status light glows.
To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the
CONTROL LOCKED status lightturns off.
Estimated time remaining
The cycle time varies automatically based on your water
pressure, water temperature, detergent and clothes load. The
cycle time will be extended if oversudsing occurs or the load is
unbalanced.
Cycles
Cycles can be selected by turning the Cycle control knob to the
desired cycle. Each cycle isdesigned for different types of fabric
and soil levels.
Cyr./ea
Ill
Each cycle has a preset Soil Level (cycle time), Water
Temperature and Spin Speed, and may have preset options.
The preset settings provide the recommended fabric care for
the selected cycle.
The preset settings can be changed anytime before HOLD TO
START is pressed. Not all options and modifiers are available
with all cycles. (To change settings after the cycle has started,
press PAUSE/CANCEL, then select the desired settings.
Press HOLD TO START to continue the cycle.)
12
Loading ...
Loading ...
Loading ...