Loading ...
Loading ...
Loading ...
Appliance settings en
31
Removing laundry/switching
off the appliance
1. Open the loading door and remove
the laundry. Follow the information
on the display panel.
2. Press the # button. The appliance is
switched off.
3. Turn off the tap.
Note: Not required for AquaStop
models.
Notes
■ Do not leave any items of laundry in
the drum. They may shrink in the
next wash or discolour another item.
■ Remove any foreign objects from the
drum and the rubber gasket – risk of
rusting.
■ Wipe the rubber gasket dry.
Notes
■ Leave the loading door and
detergent drawer open so that any
residual water can evaporate.
■ Always wait until the programme
ends, as the appliance could still be
locked. Then switch the appliance
on and wait for it to unlock.
■ If the display panel goes off at the
end of a programme, the energy-
saving mode is active. Press any
button to activate the panel.
Q Appliance settings
Appliance settings
Settings that can be selected:
■ End signal
off – quiet – medium – loud – very
loud
Adjust the volume of the end signal.
■ Button signal
off – quiet – medium – loud – very
loud
Adjust the volume of the button
signals.
■ Auto power-off of the appliance
in 15 – 30 – 60 min – never
The appliance automatically
switches off after ... minutes (= 0
kWh energy consumption); to switch
on, press the # main switch button.
■ Language
German
English
...
Change the displayed language.
■ Info: Drum cleaning
on – off
This instruction reminds you to carry
out a drum cleaning programme.
~ Page 37
To change the settings, press and hold
both Basic Settings 3 sec. buttons for
approx. 3 seconds. ~ Page 13
Notes
■ The settings are retained after the
appliance is switched off.
■ If you press and hold the buttons,
the settings run through
automatically.
Loading ...
Loading ...
Loading ...