Loading ...
Loading ...
Loading ...
8 I Chapter 4: Blower/Vac Operation
Operating the
Blower/Vac
The on/off:toggle switch has three settings;
off, low, and high. The middle switch po-
sition, marked "O", is off. The rear switch
position, marked 'T', is low: The forward
switch position, marked "11",is high. See
Figure 4-4.
Blower Operation
_IL WARNING: The blower can
throw debris, causing injury to
those nearby.
• Do not blow nails, bolts, rocks,
or other hard objects.
• Do not operate blower near
bystanders or pets.
• Be careful when blowing de-
bris from stairs, corners, or
ot her rig ht a rea s,Objects ca n be
blown back toward operator.
• Wearapprovedeyeprotection,
long pants, and shoes while
operating this blower/vac.
Properly assemble the blower/vac %r
blower operation (see page 4, Asse_'nb!ing
B/o_ver).Follow the steps below to operate
the blower.
1. Hold blower/vac using the handle on
housing (see Figure 4-5).
2. When ready to start the blower, toggle
the on/off:switch to either the low 'T'
or high "lr' setting (see Figure 4-6).
3. To stop the blower, toggle the on/off
switch to the off"O" setting.
Figure4-4: On/Offswitchpositions
Figure4-5: Holdingblower/vacfor bloweroperation
Figure4-6:On/OffSwitchto LOWposition
Figure4-7:Operatingblower
120133
Loading ...
Loading ...
Loading ...