Loading ...
Loading ...
Loading ...
6 49-9000008 Rev. 3
Functions
FUNCTIONS
Assembly of Attachments
Blending Attachment:
1. Align the motor body with the blending
attachment, then slide the pieces together.
Twist the motor body clockwise and feel the
pieces click together.
Chopper/Grinder Attachment:
3XWWKHSUHSERZORQDÀDWGU\VWDEOHVXUIDFH
2. The metal blade assembly shaft is attached to
the bottom of the prep bowl. If not already in
place, slide the blade assembly over the top of
the metal blade assembly shaft.
WARNING
HOLD THE BLADE
ASSEMBLY BY THE PLASTIC STEM
ONLY. DO NOT TOUCH THE RAZOR-
SHARP BLADES.
3. The chopper cover can only sit into the prep
bowl. It cannot be rotated.
4. Connect the motor body to the top of the
chopper/grinder attachment cover.
5. Plug the power cord into an electrical outlet.
6. Put one hand on the cover of the chopper/
grinder attachment, while gripping the handle
with the other. Press the High or Low button
ZLWK\RXU¿QJHUVWRVWDUWWKHPRWRUDQGUXQWKH
FKRSSHUJULQGHU7RWXUQWKHXQLWRႇUHPRYH
\RXU¿QJHUVIURPWKHVHOHFWHGEXWWRQ
7. WHEN THE BLADE STOPS MOVING, unplug
the Hand Blender, remove the motor body
from the chopper/grinder cover, and remove
the cover from the prep bowl.
Whisk attachment:
Align the motor body with the blending
attachment, then slide the pieces together. Twist
the motor body clockwise and feel the pieces
click together.
Operation
Blending & mixing:
The specially designed blade is for mixing
and stirring all kinds of foods, including salad
dressings, powdered drink products, and sauces.
It is ideal for combining dry ingredients, and can
be used to emulsify mayonnaise, too. This blade
mixes and stirs while adding only a minimum of
air to your mixture. A gentle up-and-down motion
LVDOO\RXQHHGWRPDNHWKHPRVWÀDYRUIXOIXOO
bodied liquid recipes. Be careful never to remove
the blender from the liquid while in operation to
avoid splatters.
1. Insert the blending attachment into the motor
body.
2. Plug electrical cord into an electrical wall
socket.
3. Insert blending shaft into mixture to be
blended.
3UHVVDQGKROGWKH2Q2ႇEXWWRQ7KHKDQG
blender will continue to run as long as the
switch is pressed in. To turn hand blender
2))UHOHDVHWKH2Q2ႇEXWWRQDQGWKHPRWRU
will stop.
5. Do not hold the button On for longer than 50
seconds at a time.
6. Unplug immediately after use.
NOTE: When using blender in a saucepan,
remove pan from stove.
Whisking:
1. Insert the whisk attachment into the motor
body.
2. Plug electrical cord into an electrical wall
socket.
3. Insert the whisk into mixture to be blended.
4. Press and hold the desired speed button.
When done whisking, release the speed
button.
5. Unplug immediately after use.
Chopping and Grinding Processing Food:
3XWWKHSUHSERZO¿UPO\RQDÀDWVWXUG\
surface like a countertop.
2. Put food into the prep bowl. Be sure the food
is cut into small pieces, and the bowl is not
overloaded.
3. Put the chopper/grinder cover on top of the
prep bowl. Be sure the cover is properly
seated.
4. Press the ON/OFF button.
NOTE: Due to the powerful motor provided with
this unit, it is recommended using one hand to
support the chopper/grinder during operation.
:KHQ\RXKDYH¿QLVKHGSURFHVVLQJWKHIRRG
VWRSWKHPDFKLQHE\WDNLQJ\RXU¿QJHUVRႇWKH
ON/OFF button.
7. WHEN THE BLADE STOPS MOVING,
remove the blender motor body from the
chopper/grinder cover, and remove the cover
from the chopper/grinder.
8. Unplug the unit.
9. Carefully remove the blade assembly, holding
it by the gripping the plastic stem. NEVER
TOUCH THE BLADE ITSELF.
10. Remove food with the spatula. Note: Do not
operate the Chopper/Grinder attachment
without food in the prep bowl.
Loading ...
Loading ...
Loading ...