Loading ...
Loading ...
Loading ...
ENGLISH
17
Cleaning and replacing the air lter
Check and clean the air lter periodically. When the indicators or a message
prompts you to clean the air lter, comply with it as soon as possible. The lter unit
is attached to inner side of the lter cover. If a lter of the lter unit is damaged or
heavily soiled, replace the whole unit with a new one.
1.
Turn the projector o, and unplug the power
cord. Allow the projector to suciently cool
down.
2.
Use a vacuum cleaner on and around the lter
cover.
3.
Pick and pull up the lter cover knobs to take it
o.
4.
Use a vacuum cleaner for the lter, take the
lter o.
5.
Use a vacuum cleaner for the lter vent of the
projector.
6.
Use a vacuum cleaner for each part of the lter.
If any part of the lter is damaged or heavily
soiled, replace the whole unit with a new one.
To purchase the new lter unit, inform your
dealer of the type number as follows.
UX44211
7.
Put the lter back in an upright state into the
projector.
8.
Put the lter cover back into the place.
9.
Turn the projector on and reset the lter time using the FILTER TIME item
in the EASY MENU.
(1) Press the MENU button to display a menu.
(2) Point at the FILTER TIME using the ▲/▼ buttons, then press the ► button.
A dialog will appear.
(3) Press the ► button to select “OK” on the dialog. It performs resetting the
lter time.
(continued on next page)
Filter cover
Filter cover knobs
2
3
4
5
Filter vent
Filter
Loading ...
Loading ...
Loading ...