Loading ...
Loading ...
Loading ...
TROUBLESHOOTING CHART
)ROBLEM CAUSE CORRECTION
Does not start
Loss of power
Poor cut- uneven
1. Dirty airfilter.
2. Out of fuel.
3. Stale fuel.
4. Water in fuel.
5. Spark plug wire is
disconnected.
6. Bad spark plug.
7. Loose blade or broken blade
adapter.
8. Control bar in released
position.
9. Control bar defective.
1. Rear of lawn mower housing
or cuttingblade dragging
in heavy grass.
2. Cuttingtoo much, grass.
3. Dirtyair filter.
4. Buildup of grass, leaves,
and trash under mower.
5. Too much oil in engine.
6. Walking speed too fast.
1. Worn, bent or loose blade.
2. Wheal heights uneven.
3. Buildup of grass, leaves
and trash under mower.
1. ClearVreplace air filter.
2. Fillfuel tank.
3. Drain tank and refillwith
fresh clean fuel.
4. Drain fuel tank and
carburetor and refilltank
with fresh gasoline.
5. Connect wire to plug.
6. Replace spark plug.
7. Tighten blade bolt or
replace blade adapter.
8. Depress controlbar to
handle.
9. Replace control bar.
1. Set to "HigherCut"
pos_on.
2. Set to "Higher Cur
position.
3. Clean/replace air filter.
4. Clean underside of mower
housing.
5. Check oil level.
6. Cut at slower walking
speed.
I
I1. Replace blade. Tighten
blade bolt.
2. Set all wheels at sarne
height
3. Clean underside of
mower housing.
16
Loading ...
Loading ...
Loading ...