Loading ...
Loading ...
Loading ...
5
INSTALLATION REQUIREMENTS
TOOLS AND PARTS
Gather the required tools and parts before starting installation. Read and follow the
instructions provided with any tools listed here.
Tools needed
•
Level
•
Drill with 1¼", ¹⁄₈", and ⁵⁄₁₆" drill bits
•
Pencil
•
Wire stripper or utility knife
•
Tape measure or ruler
•
Pliers
•
Caulking gun and weatherproof
caulking compound
•
Vent clamps
•
Jigsaw or keyhole saw
•
Flat-blade screwdriver
•
Metal snips
•
Phillips screwdriver
•
Metric hex key set
For non-vented (recirculating) installations, you will also need:
•
6" (15.2 cm) dia. round metal vent duct - length required is determined by ceiling
height.
Parts supplied
Remove parts from packages. Check that all parts are included.
•
120 V power cord with 3 prong plug
•
Hood canopy assembly with blower,
vent transition, light bulb and
canopyglass already installed
•
Metal grease lter
•
Vent cover support bracket
•
Mounting template
•
2-piece vent cover
•
4 - 4 x 8 screws
•
6 - 5 x 45 mm mounting screws
•
2 - 8 x 40 mm wall anchors
•
4 - 10 x 50 mm wall anchors
Loading ...
Loading ...
Loading ...