Loading ...
Loading ...
Loading ...
1-833-327-8625
MINI PATIO HEATER
• Be mindful to not block the ow of combustion and ventilated air. Proper
ventilation allows for the appliance to burn effectively.
• Make sure the ventilation openings are free of debris.
• Visually checking burner ames, with pictorial representations.
• Clean all parts of the appliance with recommended cleaning agents,
if needed.
• Lubrication of moving parts and the type and amount of lubricant to be used.
• When applicable, visually checking portions of the hose assembly located
within the connes of the heater post.
NOTE: You must follow all steps to properly assemble this heating item. Make
sure the gas valve is turned “OFF” before assembling. Do NOT attempt to
assemble without proper tools.
SAFETY GUIDE
CARE AND MAINTENANCE
• Gas odor with extremely yellow ame tips.
• The heater does NOT reach the desired temperature.
• The heater glow may be excessively uneven.
• The heater makes popping noises.
• Spiders and insects can nest in burner or orices. This dangerous condition
can damage the heater and may be unsafe to use. Clean all burner holes
with a heavy-duty pipe cleaner. Compressed air is an alternative that may
clear away smaller particles.
• Any carbon deposits can be a re hazard. Clean the dome and burner screen
with warm mild soap and water if any carbon deposits develop.
Note: Salty air environments, such as near an ocean, cause corrosion to occur
more quickly. If you are using the heater in this type of atmosphere, frequently
check for corroded areas and repair them immediately.
TIP: Use high-quality automobile wax to help maintain the appearance of
your heater. Apply to exterior surfaces from the pole down. Do not apply to
emitter screen or domes.
To maximize the performance and longevity of your heater, here are some
recommended best practices to maintain and clean your appliance:
• Keep all exterior surfaces clean. Use a mild soap and water regularly and/or
after use.
• Do not use any ammable or corrosive cleaning agents.
• Never submerge the control valve assembly. If the gas control gets wet or
is submerged in water, DO NOT use it. This must be replaced immediately
before the next use.
• Keep the appliance clear and free of any combustible or ammable materials,
such as gasoline, vapors, or liquids.
• Do not block the ow of combustion and ventilated air.
• Keep the ventilation openings of the cylinder free of debris and any
obstructions.
Normal Abnormal
• Keep air ow ventilating appropriately. Ensure all controls, burner,
and air passageways are clean and free of any debris or ammable
materials. Signs of possible blockage include:
Loading ...
Loading ...
Loading ...