Whirlpool WFW9400SW02 washer

User Manual - Page 11

For WFW9400SW02.

PDF File Manual, 52 pages, Read Online | Download pdf file

WFW9400SW02 photo
Loading ...
Loading ...
Loading ...
WASHERUSE
ContMs ok!Unlock
_ddo, _Sc<or,d
NORMAL
DEUCATE
_,#,s_cYas ....
CLEANWAgHER
Wrh _le_d_ Only
BULKYITEMS SXARr
;OAK
Dooriocked
mated Time {;emainJng
Deby Wash
Prewa@ Presoak Extra Rkme
@@®
OPTIONS
Warn* Medium Heavy Loud
Warm L0W Normal Soft
Cold NoSpn Ught G Off
@@@0
Wate_Temp Spit SoiJ Cyde
w_m_/ins_ Speed Level Signal
Sr,bc on
_uttor
Somd
NOTE: The panel shown above may be different from that of your model.
First Wash Cycle Without Laundry
Fire Hazard
Never place items in the washer that are dampened
with gasoline or other flammable fluids.
No washer can completely remove oil
Do not dry anything that has ever had any type of oJJon
it (including cooking oils).
Doing so can result in death, explosion, or fire.
WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the IMPORTANT SAFETY INSTRUCTIONS before
operating this appliance.
The following is a guide to using your washer. Please refer to
specific sections of this manual for more detailed information.
Do not store laundry products on the top surface of this washer.
Vibration is normal during operation.
Use only High Efficiency detergents. The package for this type
of detergent will be marked "HE" or "High Efficiency." This wash
system, along with less water, will create too much sudsing with a
regular non-HE detergent. Using regular detergent will likely result in
washer errors, longer cycle times, and reduced rinsing performance.
It may also result in component failures and noticeable mold or
mildew. HE detergents are made to produce the right amount of suds
for the best performance. Follow the manufacturer's instructions
to determine the amount of detergent to use. Remember,
concentrated detergent such as 2x or higher will use less detergent
based on load size.
Before washing clothes for the first time, if not completed during
the final installation step, choose the Normal/Casual cycle and
run it without clothes. Use only HE High Efficiency detergent. Use
_/2the manufacturer's recommended amount for a medium-size
load. This initial cycle serves to ensure the interior is clean before
washing clothes.
For All Wash Cycles
1. Open the washer door by pulling on the handle. Sort laundry
according to color and type of fabric. Place a load of sorted
clothes in the washer. Do not overload washer. Overloading
can cause poor cleaning.
[] The washer can be fully loaded, but not tightly packed.
Washer door should close easily.
[] Mix large and small items and avoid washing single items.
Load evenly.
[] Wash small items, such as infant socks, in mesh garment
bags. It is recommended that more than one garment bag
be used, and that each garment bag be filled with equal
amounts of material.
2=
[] When unloading garments, occasionally check under the
gray colored seal at the front of the tub for small items.
Close the washer door by pushing it firmly until the lock
clicks. The washer door will remain locked during the wash
cycle.
NOTES:
[]
[]
After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin.
The door can be opened only if PAUSE/CANCEL is
selected while the Add A Garment light is glowing or if the
cycle has been canceled.
See "To cancel a cycle" in "Changing Cycles, Options,
and Modifiers" section.
3=
4=
Open the dispenser drawer and add laundry products to the
detergent, bleach, or fabric softener compartments. Close
drawer slowly to avoid spills. See "Using the Dispenser."
Turn on the washer by selecting POWER. Select one of the
cycles by turning the cycle selector. The indicator light for the
selected cycle will glow green. When you are selecting a
wash cycle, the preset options and modifiers (such as Water
Temp, Spin Speed, and Soil Level) for the selected cycle will
Use only HE High Efficiency detergent.
11
Loading ...
Loading ...
Loading ...