Loading ...
Loading ...
Loading ...
6 7
Radio - Press this button to play
the radio. Hold for 3 seconds to
scan available FM channels.
Alarm Tone - Press this button to
choose an alarm tone, using (+)
and (-) to adjust. Press again to
conrm.
Lower Volume - Press to decrease
volume.
Snooze - Press to momentarily
stop alarm sound. The default
snooze time is 5 minutes. Press
to change it to 10/15/20 minutes.
After that time, the alarm tone will
resume playing.
Raise Volume - Press to increase
volume.
Display Brightness - Press this
button to choose between three
different LED display intensities:
low, high, and off. Note: The
clock will automatically display
the brightest intensity during
programming but will resume
to the chosen option after 5
seconds.
LED Light - Press once to turn on
the light, then press and hold (+)
and (-) to adjust among 10 levels
of brightness. Press a second time
to switch on light colors, using (+)
and (-) to choose between 8 colors:
warm white, cycling color, red,
green, orange, pink, blue, and light
green. Press and hold to switch off.
Digital Display - This screen
displays the time and modes you
have selected.
AM Icon - This indicates AM time
when displayed.
PM Icon - This indicates PM time
when displayed.
Alarm Icon - This indicates you
have programmed an alarm when
displayed.
Sleep Timer Icon - This indicates
you have set a sleep timer when
displayed.
Select down - Touch down to
maneuver among sound, light, or
radio options.
Select up - Touch down to maneuver
among sound, light, or radio options.
Alarm Option - Touch to turn on
alarm mode. The existing alarm
time will display for 2 seconds. To
adjust the alarm time, hold for 3
seconds then use (+) and (-) to
adjust the hour. Press again to
adjust the minute, and one last
time to conrm.
To dismiss alarm, touch to stop
alarm tone completely.
Current Time - This button is used
to set the time. Press it to switch
between a 12-hour and 24-hour
clock, or hold for 3 seconds until
the hour time begins to blink.
Then use the (+) and (-) to adjust
the hour. Press the button again
to conrm the hour. Move to the
minutes and choose in the same
way. Press one nal time to set
the time.
Sleep Timer - Touch this button
to initiate sleep timer. Touch the
Sleep Timer button once to set
at 15 minutes and each press will
add 15 minutes to the timer. Light
will gradually dim until it turns off
over the course of set time. Press
twice for 30 minutes, three times
for 60 minutes, and four times to
turn off. Leave for 5 seconds to
conrm.
Using Your Alarm Clock
Glossary
Set Up Your Clock
1. Insert one CR2032 battery into the
back of clock. Note that the battery is
for backup power only.
2. Connect to DC 5V power.
Set the Time
1. Hold the Current Time button for 3
seconds until the hour time begins to
blink.
2. Use (+) and (-) to adjust the hour.
3. Touch the Current Time button to
conrm the hour time and move on
to minutes.
4. Use (+) and (-) to adjust the minutes.
5. Touch the Current Time button once
more to conrm.
Program Your Sunrise Alarm
1. Hold for 2 seconds to enter Alarm
setting mode
2. Use (+) and (-) to adjust the time. Tap
Alarm Option button to conrm.
3. Use (+) and (-) to set up alarm light
rising time: 10/20/30/40/50/60 min/
OFF. Tap Alarm Option button to
conrm.
4. Use (+) and (-) to select the alarm
light color. Tap Alarm Option button
to conrm.
Set Your Alarm Tone
1. Press the Alarm Tone button to
choose a tone.
2. Use (+) and (-) to select between 7
sounds. Tone 1-6 consist of nature
sounds, while tone 7 plays FM radio.
“Program the Radio”.
3. Wait for clock to return to standby
mode, then press or to adjust
volume. You must not be in “Tone”,
“Light”, “Radio”, or any other mode.
4. Press the Alarm Tone button to
conrm your tone.
NOTE: Alarm volume and radio volume
are adjusted separately.
Adjust Sleep Timer
1. Touch the Sleep Timer button to
initiate sunset simulation.
2. Touch the Sleep Timer button once to
set at 15 minutes. Light will gradually
dim until it turns off over the course
of 15 minutes.
3. Touch the Sleep Timer button a
second time for sunset simulation
over 30 minutes.
4. Touch the Sleep Timer button three
times for 60 minutes.
5. Touch the Sleep Timer button four
times to turn off.
6. Leave for 5 seconds to conrm
selected option.
Adjust Light
1. Press the LED Light button once to
turn on the light.
2. Use (+) and (-) to adjust between 10
levels of brightness.
3. Press the LED Light button a second
time to switch on light colors.
4. Use (+) and (-) to choose between 8
colors: warm white, cycling color, red,
green, orange, pink, blue, and light green.
Adjust Display Brightness
1. Press the Display Brightness button to
choose between three different LED
display intensities: low, high, and off.
2. The clock will automatically display
the brightest intensity during
programming but will resume to the
chosen option after 5 seconds.
Adjust Volume
1. Select the Lower Volume button to
lower the volume.
2. Select Raise Volume button to raise
the volume.
Program the Radio
1. Hold the Radio button for 3 seconds
to scan available FM channels. These
Loading ...
Loading ...
Loading ...