Loading ...
Loading ...
Loading ...
MAINTENANCE
To adjust anti-scalp rollers
Deck has anti-scalp rollers.
Anti-scalp rollers are properly adjusted when
they are just slightly off of the ground when
the deck is at the desired cutting height in the
operating position. Anti-scalp rollers then
keep the deck in the proper position to help
prevent scalping in most terrain conditions.
IMPORTANT INFORMATION
Adjust Anti-scalp rollers with the mower
on a flat level surface.
.
.
4.
5.
6.
Adjust the deck to the desired cutting
height (see "TO ADJUST DECK
CUTTING HEIGHT" in the operation
section of this manual).
Using a 3/4" wrench and a 9/16" wrench,
remove the nut and shoulder bolt from
the anti-scalp roller.
Lower the anti-scalp roller to the ground,
and raise it up to the next highest hole.
Replace and tighten the nut and shoulder
bolt.
Be sure to adjust all of the anti-scalp
rollers to the same position.
Be sure to readjust the anti-scalp rollers
if the cutting height is changed.
\
®
Anti-scalp roller
cz 9
IMPORTANT INFORMATION
The anti-scalp rollers must not be used for
gauge wheels or the roller and deck may
be damaged.
English-49
Loading ...
Loading ...
Loading ...