User Manual Smeg K7088D180SS Canopy Rangehood

Documents for Smeg K7088D180SS

The following documents are available:
User Manual Photos
K7088D180SS photo
K7088D/180
180cm wall mounted, twin chimney rangehood
ASC — automatic sensor control
dimensions
1800mmW x 500mmD x 1240mm maximum H
nish
satin stainless steel
installation
wall mount
motors
2 x 250 watt centrifugal motors —
each motor: twin impellors, double air uptake
air extraction
• duct direct to atmosphere — 150mm diameter ducting required
• recirculate to kitchen — 125mm diameter ducting required
NB: for recirculation, a recirculation diverter kit is supplied for each
chimney
capacity
each half: 750m³/hr net
illumination
4 x 20 watt halogens
noise rating
1 x 38 dBA minimum → 2 x 58 dBA maximum
speeds
four per motor
delay stop
ve minute delay stop selection
controls
four buttons, one LED window
ltration
six removable four-ply stainless steel (washable)
prompts
via LED window ashing —
• ve-minute delay stop
• 30-hour stainless steel lter cleaning prompt
• 120-hour charcoal lter inspection prompt
supplied
• two one-way, non-return buttery valves — removable
• two 150-125mm diameter duct size adaptors
• two recirculation diverter kits
accessory
optional activated charcoal lter for each motor, part number 08999802
warranty
two years on parts and labour
ASC AUTOMATIC SENSING CONTROL
By selecting this button, the K7088D/180 automatically
senses any vapours, smoke and odours caused by the
cooking process and adjusts the speed of extraction
accordingly. The ASC will also sense and capture an
abnormal presence of gas.
DELAY STOP
When cooking is nished, it is recommended that the
rangehood be left running for a few minutes, even at a
lower speed, to pull through all residual heat, grime and
odours. Selecting the DELAY STOP eliminates the need
to return to the rangehood to turn it off manually. It will
also turn off the lights if they were previously left on.
FILTER INSPECTION PROMPTS
After 30 hours of use, the LED window will visually prompt
for you to inspect the ve stainless steel grease lters
for possible washing. The cleaner the lters, the more
effective is the airow. The controls are simply reset to
zero hours and the counting starts over. The lters can
be cleaned at any time, without waiting for the prompt.
After 120 hours of operation, there is an additional
prompt to check the charcoal lters if they have been
tted for the recirculation mode.
DUCTING TO ATMOSPHERE
Extracting the air direct to atmosphere ensures the
maximum removal of grease/oil/particle-laden vapour,
odours and, very importantly, the heat — resulting in
a cleaner, more comfortable cooking environment.
An internal ducting pipe could, ideally, continue in a
straight line within the decorative ue to the kitchen
roof, then through the roof cavity and exit via a roof
cowl. If the rangehood is mounted against an external
wall, the ducting could, as effectively, exit at the rear
anywhere along the vertical line of the concealing
decorative ue and at a position that is structurally
feasible for an external wall cowl.
RECIRCULATION
When the cooking vapours cannot be ducted to
atmosphere, that is, the rangehood is mounted on an
internal wall and/or there is another storey above, the
supplied recirculation kit is inserted into the telescopic
ue. An activated charcoal lter can be tted below the
centrifugal motor. This will effectively diminish cooking
odours. The charcoal lter is not to be washed and is
replaceable.
DUCTING MATERIAL
The smooth internal walls of either galvanised sheet
metal piping or high temperature-resistant PVC will assist
in both greater unobstructed air ow and a quieter
operation. Flexible ducting can be considered for the
very short run and difcult obtuse bends.
CHARCOAL FILTER
In the recirculation mode, the rangehood is also sending
the cooking odours back into the kitchen. An activated
charcoal lter panel, part number 08999802, can be
inserted just below the motor housing to effectively
diminish the cooking odours. This charcoal lter is not to
be washed; however, it is replaceable.
ID010708
code K7088D180
Loading ...