Loading ...
Loading ...
Loading ...
22
Problem Solution
The AC power cable
is plugged in, but
there’s no power.
• Make sure both ends of the AC power cable are completely plugged into their respective sockets.
• Make sure the wall outlet is live.
• Make sure the power switch is in the On position (up), and that the power indicator is illuminated.
There’s no sound,
or the volume is
too low.
Turn down the main volume on the PA-5150BT before troubleshooting this problem.
• Check to see if the main level is turned up high enough.
• Check the input gain levels to make sure they are turned up.
• Make sure the volume control of your input device is turned up.
• Make sure all cables are completely connected at both ends.
• Check to see if a mute is engaged on the remote.
• If your microphone has an on/off switch, make sure it’s turned on.
The sound is too
loud or distorted.
• Turn down the volume control of your input device.
• Turn down the input gain level of the channel that’s distorting.
• Turn down the main level.
Audio doesn’t sound
right.
• Use the EQ button on the remote to make sure the EQ is set to NORMAL.
• Move the high and low EQ dials to the center position, and adjust the audio as needed.
TROUBLESHOOTING
Loading ...
Loading ...