Loading ...
Loading ...
Loading ...
29
BEFORE YOU CALL
Dirt remains after self-cleaning • The self-cleaning has been interrupted. Review the "Self Cleaning" instructions.
• Excessive spills on the oven floor. Clean up any excess spills before starting self-
cleaning.
• Failure to clean dirt from the oven frame, door trim outside the door seal and the
small area in the center front of the oven hearth. These areas are not part of the
self-cleaning area, but become hot enough to burn the residue. Clean these areas
manually before starting the cleaning cycle. The residue can be cleaned with a
nylon brush and water or a nylon scouring pad. Take care not to damage the oven
seal.
Other Problems
Appliance is not level • Poor installation. Place oven rack in center of oven. Place a level on the oven rack.
• Kitchen cabinet alignment may make oven appear not level. Be sure cabinets are
square and have sufficient room for appliance clearance.
• If cabinets are not square or are built in too tightly, contact builder or installer to
make appliance accessible.
Cannot move appliance easily • Contact builder or installer to make appliance accessible.
Loading ...