Loading ...
Loading ...
Loading ...
AdjustingtheControls
For your convenience, your refrigerator and freezer controls are preset at
the factory. When you first install your refrigerator, make sure that the
controls are still set to the "mid-settings." The factory recommended set
points are 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.
IMPORTANT:
• Wait 24 hours before you put food into the refrigerator. If you add
food before the refrigerator has cooled completely, your food may
spoil.
NOTE: Adjusting the set points to a colder than recommended setting
will not cool the compartments any faster.
If the temperature is too warm or too cold in the refrigerator or
freezer° first check the air vents to be sure they are not blocked before
adjusting the controls.
The preset settings should be correct for normal household usage. The
controls are set correctly when milk or juice is as cold as you like and
when ice cream is firm.
• Wait at least 24 hours between adjustments. Recheck the
temperatures before other adjustments are made.
To view and adjust the set points, press and hold the TEMPERATURE button
for 3 seconds. When adjust mode is activated, adjusting information will
appear on the display screen.
NOTE: To view Celsius temperatures, press the MEASURED FILL button
when adjust mode is activated. To return the display setting to Fahrenheit,
press MEASURED FILL again.
• When adjust mode is activated, the display screen shows the
refrigerator set point and "REFRIGERATOR" appears.
• Press SETTINGS to raise the set point, or press TEMPERATURE to lower
the set point.
When you have finished viewing (and adjusting if desired) the
refrigerator set point, press ACCENT LIGHT to change the display to
show the freezer set point. When the zone has been changed,
"FREEZER" appears on the display screen.
• Press SETTINGS to raise the set point, or press TEMPERATURE to lower
the set point.
When you have finished viewing (and adjusting if desired) both the
refrigerator and freezer set points, press LOCI( to save the settings.
NOTE: To exit without saving changes, press WATER/ICE at any time
while in adjust mode, or allow about 60 seconds of inactivity and
adjust mode will turn off automatically.
When adjusting temperature set points, use the following chart as a guide.
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm REFRIGERATOR Setting
1° lower
FREEZER too cold FREEZER Setting
1° higher
FREEZER too warm / FREEZER Setting
Too little ice 1° lower
The set point range for the refrigerator is 33°F to 42°F (O°C to 6°C). The
set point range for the freezer is -9°F to 5°F (-23°C to -15°C).
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is turned off.
• To turn cooling off, press and hold the LOCI( and MEASURED FILL
buttons at the same time for 3 seconds.
IMPORTANT: To avoid unintentionally locking the dispenser or
changing other settings, be sure to press both buttons at exactly the
same time.
When cooling is off, "COOLING OFF" will appear on the display
screen.
• Press and hold LOCI( and MEASURED FILL for 3 seconds again to turn
cooling back on.
Additional Features
Accelerated Ice Production
The Accelerated Ice feature assists with temporary periods of heavy ice
usage by increasing ice production.
IMPORTANT: This feature only works if the ice maker is turned on. See "ice
Maker and Storage Bin."
• To turn on the feature° press SETTINGS then TEMPERATURE. When the
feature is on, the Accelerated Ice icon will appear on the dispenser
display screen.
_ z_ Accela
- _ ke
The Accelerated Ice setting will remain on for a minimum of
90 minutes unless manually turned off.
• To manually turn off the feature, press SETTINGS then TEMPERATURE
again, or adjust the freezer temperature set point. The Accelerated Ice
icon will disappear when the feature is off.
NOTE: If increased ice production is desired at all times, change the
freezer set point to a lower setting. Setting the freezer to a colder
temperature may make some foods, such as ice cream, harder.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the refrigerator or
freezer door is open for 5 minutes and the product cooling is turned on.
The alarm will repeat every 2 minutes. Close both doors to turn it off. The
feature then resets and will reactivate when either door is left open again
for 5 minutes.
NOTE: To mute the audible alarm while keeping the doors open, such as
while cleaning the inside of the refrigerator, press any button on the control
panel. The alarm sound will be temporarily turned off, but the Door Ajar
icon will still be displayed on the dispenser control panel.
17
Loading ...
Loading ...
Loading ...