Loading ...
Loading ...
Loading ...
Installation Instructions
18
B4
ADAPTING MICROWAVE BLOWER
FOR OUTSIDE BACK EXHAUST
(cont.)
4.Rotate blower unit counterclockwise 180°.
5.Place the blower unit back into the opening.
CAUTION: Do not pull or stretch the blower unit
wiring. Make sure the wires are not
pinched.
NOTE: The blower unit exhaust openings should
match exhaust openings on rear of microwave
oven.
6.Secure the blower unit to the microwave with the
screw from Step 1.
7.Replace the blower plate in the same position as
before with the screw.
8.
Attach the exhaust adaptor to the rear of the oven
by sliding it into the guides at the top center of the
back of the oven.
Push in securely until it is in the lower locking tabs.
Take care to assure that the damper hinge is installed
so that it is at the top and that the damper swings
freely.
Openings Facing Back
Back of
Microwave
Blower Motor
Screw
Blower Plate
Guide
Back of
Microwave
Locking Tabs
Adaptor
Guide
Part”A”
3.Remove “Parts A”with Nipper or Scissors.
Before Rotation After Rotation
Back of
Microwave
Back of
Microwave
AFTER: Fan Blade
Openings Facing Back
End A
End B
Loading ...
Loading ...
Loading ...