Loading ...
Loading ...
3
STEP 3: INSTALL DOOR PANEL TRIM AND CUSTOM PANEL
A
B
C
• Place bottom trim against the bottom of the door panel and
drive center screw, then left and right screws. Use the
8 - 18 x 5/16" color-matched screws provided.
• Slide “Z” shaped trim under the escutcheon.
• Slide custom door panel under the “Z” trim
and bottom trim.
• The notch on the side trim pieces goes towards the front.
Slide side trim up and under the escutcheon and over the
edge of the custom panel.
D
E
• Use masking tape to hold trim tightly against the custom
panel.
F
• Use the holes in the side trim pieces to locate, center punch,
and then drill 1/8" holes in the dishwasher panel. Use care
when performing this operation to prevent damage to the
side trim.
• Fasten the trim to the dishwasher door panel with the
8 - 18 x 5/16" color-matched screws.
• Remove tape.
Drill 1/8" Holes
and Install Screws
05C-1277J
Escutcheon
Loading ...