AEG DEE431010B 6000 SurroundCook with Clean enamel cleaning

User Manual - Page 4

For DEE431010B.

PDF File Manual, 24 pages, Read Online | Download pdf file

DEE431010B photo
Loading ...
Loading ...
Loading ...
Disconnect the appliance from the power supply before
carrying out any maintenance.
If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre
or similarly qualified persons to avoid an electrical hazard.
The means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules.
WARNING: Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of electric shock.
WARNING: The appliance and its accessible parts become
hot during use. Care should be taken to avoid touching
heating elements.
Always use oven gloves to remove or put in accessories or
ovenware.
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls.
Install the shelf supports in the opposite sequence.
Do not use a steam cleaner to clean the appliance.
Do not use harsh abrasive cleaners or sharp metal scrapers
to clean the glass door since they can scratch the surface,
which may result in shattering of the glass.
2. SAFETY INSTRUCTIONS
2.1 Installation
WARNING!
Only a qualified person must
install this appliance.
Remove all the packaging.
Do not install or use a damaged
appliance.
Follow the installation instructions
supplied with the appliance.
Always take care when moving the
appliance as it is heavy. Always use
safety gloves and enclosed footwear.
Do not pull the appliance by the handle.
Install the appliance in a safe and suitable
place that meets installation requirements.
Keep the minimum distance from other
appliances and units.
Before mounting the appliance, check if
the oven door opens without restraint.
The appliance is equipped with an electric
cooling system. It must be operated with
the electric power supply.
The built-in unit must meet the stability
requirements of DIN 68930.
Cabinet minimum height
(Cabinet under the worktop
minimum height)
875 mm
Cabinet width 560-570 mm
Cabinet depth 550 mm
Height of the front of the
appliance
888 mm
4 ENGLISH
Loading ...
Loading ...
Loading ...