Loading ...
Loading ...
Loading ...
8
stop its use, so as not to affect the service life.
Defrosting
This appliance is designed with automatic defrosting function, thus no need to defrost it manually.
Changing the lamp
The LED lamp is used by the refrigerator for lighting, which features low energy consumption and long service life. In case
of any abnormality, please contact the after-sales personnel for visiting service. The lamps can only be replaced by the
manufacturer, together with a part of the appliance.
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheat?
Note: Electric shock and fire accident may be caused in case the power cord and plugs damaged or stained
by dust. If any abnormality, please unplug the power plug and get in contact with the vendor.
Simple fault analysis and elimination
Regarding the following small faults, not every failure needs to be fixed by the technical service personnel; you can try to
solve the problem.
Case
Inspection
Solutions
• Completely
non-refrigeration
• Is power plug off?
• Are breakers and fuses broken?
• No electricity or line trip?
• Where is the refrigerator installed?Is it
placed in balconies, garages, storage rooms
and other places where the ambient
temperature is below 10℃?
• Re-plug
• Opening the door and checking whether the
lamp is lit.
•
Power outage or line tripping?
• Install refrigerator in a location that is protected
and the ambient temperature is above
10 ℃.If your refrigerator is installed in too low te
mperature,the internal cooling system may not
work correctly.
•Abnormal noise
• Is refrigerator stable?
• Does refrigerator reach the wall?
• Adjusting refrigerator's adjustable feet.
• Off the wall.
• Poor
refrigerating
efficiency
• Do you put hot food or too much food?
• Do you open the door frequently?
• Do you clip food bag to the seal of door?
•
Direct sunlight or near a furnace or
stove?
• Is it well-ventilated?
• Temperature setting in too high?
• Putting food into refrigerator when hot food
becomes cool.
• Checking and closing the door.
• Removing
the refrigerator from the heat
source.
• Emptying
the distance to maintain good
ventilation.
• Setting to the appropriate temperature.
•Peculiar smell in
refrigerator
• Any spoiled food?
• Do you need to clean refrigerator?
• Do you pack food of strong flavors?
• Throwing away spoiled food.
• Cleaning refrigerator.
• Packing food of strong flavors.
Fridge light out;
• Is there a door open alarm? Has the door
been open for more than 10 minutes?
• If there is a door open alarm, close the door,
and open it again after 5s, observing whether
the fridge LED light turns on.
Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself. Repairs
carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the local store where your
purchase was made. This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean the
appliance, leaving the door ajar to prevent unpleasant smells.
Servicing
Certifications
Electrical information
This electrical appliance must be grounded
This product is equipped with a plug, which is suitable for all houses equipped with sockets meeting the current
specifications
If the fitted plug is not suitable for your socket outlets, it should be cut off and carefully disposed of. To avoid a possible
shock hazard, do not insert the discarded plug into a socket.
This product complies the EEC directives.
Safe recovery instructions
Disposal
Old appliances still have some surplus value. An environmentally friendly approach will ensure that valuable raw materials
are recycled.
The refrigerants used in your equipment and insulation materials require special handling procedures. Make sure there is
Loading ...
Loading ...
Loading ...