Loading ...
Loading ...
Loading ...
A
B
C
D
E
F
F
G
G
I
Recessed
receptacle
locations
Utility
opening
H
Opening and utility location dimensions
Opening width - A
24” (60.96 cm) min.
Opening depth - B
24” (60.96 cm) min.
Opening height - C
34
1
/2” (87.6 cm) min.
35” (88.9 cm) max.
Dimension - D
12
1
/16” (30.64 cm)
Dimension - E 21
3
/4” (55.24 cm)
Dimension - F 1
3
/4” (4.44 cm)
Dimension - G 3” (7.62 cm)
Dimension - H 4
1
/2” (11.43 cm)
Dimension - I 9
1
/4” (23.49 cm)
For flush installation, the power outlet can be installed in
adjacent cabinetry with a cutout on the power cord side for
routing of the power cord.
The power outlet can also be recessed on the back wall
behind the unit as per recommended receptacle locations in
the above illustration.
Bed and breakfast type environments;
Catering and similar non-retail applications.
NOTES:
For the double drawer to be fl ush with the front of the base
cabinets, remove any baseboards or moldings from the rear
of the opening. See “Product Dimensions” and later in this
section, “Opening Dimensions.”
It is recommended that you do not install the double drawer
near an oven, radiator, or other heat source.
Do not install in a location where the temperature will fall
below 55 °F (13 °C). For best performance, do not install the
refrigerator drawers behind a cabinet door or block the base
grille.
Opening dimensions:
Height dimensions are shown with the leveling legs
extended to the minimum height.
NOTE: When leveling legs are fully extended, add 5/8”
(1.5 cm) to the height dimensions. See “Product
Dimensions.”
If the fl oor of the opening is not level with the kitchen fl oor,
shim the opening to make it level with the kitchen fl oor.
Product Dimension
Drawer height dimensions:
Height dimensions are shown with the leveling legs
extended to 1/4” (0.63 cm) below the refrigerator drawers.
When leveling legs are fully extended to 1” (2.54 cm) below
the refrigerator drawers, add 3/4” (1.9 cm) to the height
dimensions.
The power cord is 60” (152.4 cm) long.
Style 1- Stainless steel (front view)
Style 2 - Overlay (front view)
4
1/4"
(0.63 cm)
15"
(38.1 cm)
30
1
/8"
(76.6 cm)
15"
(38.1 cm)
34
1
/8"
(86.8 cm)
1/4"
(0.63 cm)
15"
(38.1 cm)
30
1
/8"
(76.6 cm)
15"
(38.1 cm)
34
1
/8"
(86.8 cm)
05-May-2021 10:43:59 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Loading ...
Loading ...
Loading ...