User Manual - Page 16

The term “IC” before the radio certifi cation number only signifi es that Industry Canada technical specifi cations were met.

Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot be adjusted without

factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter incoming and outgoing signals in order

to increase coverage of authorized frequency bands only. If the Signal Booster is not in use for fi ve minutes, it will reduce gain until a

signal is detected. If a detected signal is too high in a frequency band, or if the Signal Booster detects an oscillation, the Signal Booster

will automatically turn the power o on that band. For a detected oscillation the Signal Booster will automatically resume normal

operation after a minimum of 1 minute. After 5 (fi ve) such automatic restarts, any problematic bands are permanently shut o until the

Signal Booster has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity

are maintained by the Signal Booster’s microprocessor.