Loading ...
Loading ...
Loading ...
32
TROUBLESHOOTING
If you experience Possible Causes Solution
Dryer Displays Code Message or LED Symbol Lights Up
Water tank is filled with water. Empty water tank; make sure to insert it properly afterwards.
Water tank is not correctly
positioned.
Push in the water tank to make sure that it is correctly inserted
in the tank compartment.
Bottom filter is blocked by lint. Clean the bottom filter; make sure to insert it properly afterwards.
Bottom filter is not correctly
positioned.
Push in the bottom filter and move the release levers into
a vertical position to make sure the filter is correctly inserted
in the filter compartment. Close the flap.
Door filter is blocked by lint. Remove and clean the door filter; afterwards, make sure to insert
it properly in the filter compartment.
Door filter is not correctly positioned. Check position of the door filter; make sure that it is properly
inserted in the filter compartment.
F01 to F04 A component has failed. Touch and hold the Power button for at least 3 seconds while
dryer is on.
F05 to F09 A component has failed. Turn off and unplug the dryer. Immediately open the door and
take out the laundry so that the heat can dissipate. Make sure
that the ambient temperature ranges between 41°F (5°C) and
95°F (35°C). After about one hour, plug in the dryer, load the
laundry, and start the program/cycle again. If the failure persists,
call for service.
F10 to F24 A component has failed. Turn off and unplug the dryer. After about half an hour, plug
in the dryer and start the program/cycle again. If the failure
persists, call for service.
First try the solutions suggested here or visit our website at www.whirlpool.com/product_help –
In Canada www.whirlpool.ca for assistance and to possibly avoid a service call.
Loading ...
Loading ...
Loading ...