DAP-2622 User Manual

Loading ...

D-Link DAP-2622 User Manual

Wi-Fi Protected Access (WPA / WPA2)

WPA was created by the Wi-Fi Alliance to address the limitations and weaknesses found in WEP. This protocol is mainly based on the 802.11i

standard. There are also two variations found in WPA called WPA-Personal (PSK) and WPA-Enterprise (EAP).

WPA-EAP requires the user to install a RADIUS server on the network for authentication.

WPA-Personal does not require the user to install a RADIUS server on the network.

WPA-PSK is a weaker form of authentication when compared with WPA-EAP, but WPA-PSK is far more secure than WEP.

WPA2 is an upgraded form of WPA. WPA2 solves some security issues found in WPA. Similar to WPA, WPA2 has two variations, called WPA2-

Personal (PSK) and WPA2-Enterprise (EAP).

WPA Mode:

Cipher Type:

Group Key Update:

PassPhrase:

When WPA-Personal is selected, you must also select a

WPA mode from the drop-down menu: AUTO (WPA or

WPA2), WPA2 Only, or WPA Only. WPA and WPA2 use

dierent algorithms. AUTO (WPA or WPA2) allows you to

use both WPA and WPA2.

When you select WPA-Personal, you must also select

AUTO, AES, or TKIP from the pull-down menu.

Select the interval during which the group key will be valid.

The default value of 3600 is recommended.

When you select WPA-Personal, please enter a passphrase

in the corresponding eld.

Loading ...

D-Link DAP-2622 Wireless AC1200 Wave 2 In-Wall PoE Access Point