Loading ...
Loading ...
Loading ...
13
Loading the Dishwasher
12
• Your dishwasher holds a maximum of 14 place settings.
• Place all containers such as cups, glasses, and pots into the
dishwasher with the opening facing downwards (so that no water can
collect).
• Small and light items can go into the upper rack.
• Long and narrow items are placed in the middle of the racks.
• Place all large and very dirty items in the lower rack.
• Dishes and cutlery should not be placed above each other.
• Glasses should not touch each other.
• The movement of the spray arms must not be hindered.
• DO NOT overload your dishwasher and pay attention to manufacturer
instructions regarding dishes which are appropriate for use in a
dishwasher. Only with suitable dishes (mentioned in next section) will
you obtain optimal washing results with a sensible use of energy.
Upper Rack
Load the upper rack with dessert plates,
cups, glasses, etc.
Getting Started
Getting Started
Rack Adjustments
Variable Height Setting
The upper rack is equipped with a lifting mechanism which enables
you to change the height of the rack even if it is fully loaded, and
without having to remove it from the dishwasher.
Lift Upper Rack
• To lift the upper rack to a higher position, hold it on one side and
carefully pull it upwards A.
• To lift the opposite side of the rack, hold it and pull it upwards in
the same manner.
Lower Upper Rack
• To lower the upper rack, hold and press in the rack lever on one
side and carefully lower the rack without releasing the lever B.
• Repeat the procedure with the lever on the opposite side of the
rack.
NOTICE
Make sure that both levers catch in
the same height position.
Folding Tines
There are “folding tines” in the upper
rack to allow you more space to
accommodate glasses or cups.
• Simply pull in the first front folding
tine, move it to left A and right B to
place in another position. The tines
will also lay flat.
Adjustable Shelves
Depending on the size of the glasses
and cups, the shelf height setting may
be adjusted.
• Fold the shelf upwards A.
• Positioning at the desired height B.
• Fold the shelf again downwards C.
Loading ...
Loading ...
Loading ...