Loading ...
Loading ...
Loading ...
Technisches Datenblatt / Technical datasheet: PW 6207 EL
Datum / Date: 12-01-2011 Seite / Page: 9
Cold water
Hard water
Water pressure/Min. flow rate
14.5 psi
100 kPa
Water pressure/Max. flow rate
145.04 psi
1,000 kPa
Max. volume flow
7 gal/min
32 l/min
2 Connector hoses with threaded joint ¾“ including Y fitting
(¾“ / 1“) optionally included with the unit.
Threaded connector fitting at site as per DIN 44 991 (flat
sealing)
1“ external
thread
1“ external
thread
Length of connector hose
4„ 11 1/16“
1,500 mm
Average water requirement for a standard program (60°
colored washing) determined at cold, hot and hard water
connection.
19 gal/h
approx. 72 l/h
Cold water
Liquid dispensing
Water pressure/Min. flow rate
14.5 psi
100 kPa
Water pressure/Max. flow rate
145.04 psi
1,000 kPa
Max. volume flow
1.45 gal/min
5.5 l/min
1 Connector hose with threaded joint ¾“ optionally included
with the unit.
Threaded connector fitting at site as per DIN 44 991 (flat
sealing)
¾" external
thread
¾" external
thread
Length of connector hose
4‟ 11 1/16”
1.500
Drainage
Dump valve
Max. water outflow temperature
203°F
95 °C
Drainage supports in machine (outer diameter)
2 15/16“
[DN 2 3/4“]
75 mm [DN 70]
On-site drain connection (inner diameter)
2 15/16“ [DN
2 3/4“ sleeve]
75 mm [DN 70
sleeve]
Max. transient throughput
43.99 gal/min
200 l/min
Vented drainage required. If ventilation is insufficient, fit
Miele kit, Mat. no. 05238090.
Drain manifolds serving several machines must be of suffi-
cient cross-section.
Fittings
without plinth
It is essential to ensure that the appliance is fastened ade-
quately to the substrate!
Fastening material included with unit:
2 × wood screws DIN 571 (Ø × length)
1/2” x 3 9/16”
12 x 90 mm
2 × screw anchors (Ø × length)
5/8” x 3 1/8”
16 x 80 mm
A sufficiently firm substrate with sufficient load-bearing
capacity is necessary for the installation. The fastening
material included is only suitable for a solid concrete sub-
strate. The fastening material for other suitable substrates
must be provided on site.
on concrete platform
It is essential to ensure that the appliance is fastened ade-
quately to the substrate!
Fastening material included with unit:
2 × wood screws DIN 571 (Ø × length)
1/2” x 3 9/16”
12 x 90 mm
2 × screw anchors (Ø × length)
5/8” x 3 1/8”
16 x 80 mm
The quality of the concrete and its strength must be as-
sessed according to the machine load. Ensure that the
location of the platform is fixed adequately in the case of
dynamic loads!
Miele base
It is essential to ensure that the base is fastened adequately
to the substrate!
Fastening material included with base:
4 × wood screws DIN 571 (Ø × length)
5/16“ x 3 1/8“
8 x 80 mm
4 × screw anchors (Ø × length)
1/2“ x 2 3/8“
12 x 60 mm
The installation and assembly of the appliance and base
must follow the installation instructions provided
Loading ...