Loading ...
Loading ...
3. Extreme caution is necessary when any heater is used by or near children
or persons with physical challenges and whenever the heater is left
operating and unattended.
4. Do not operate the heater with a damaged cord or plug, or after the heater
malfunctions, has been dropped, or damaged in any manner. Return the
heater to an authorized service facility for examination, electrical or
mechanical adjustment, or repair.
5. Do not use outdoors.
6. This heater is not intended for use in bathrooms, laundry areas, or similar
locations. Never locate the heater where it may fall into a bathtub or other
water container.
7. Do not run the cord under carpeting and do not cover the cord with throw
rugs, runners or the like. Do not route cord under furniture or appliances.
Arrange the cord away from traffic areas to avoid a tripping hazard.
8. To disconnect the heater, turn controls to OFF, then remove plug from outlet.
9. Do not insert or allow foreign objects to enter any ventilation or exhaust
opening as this may cause an electric shock, fire, or damage to the heater.
10. Connect to properly grounded outlets only.
11.To prevent a possible fire, do not block air intakes or exhaust openings in
any manner. Do not use on soft surfaces, like a bed, where openings may
become blocked. Use the heater on flat, dry surfaces only.
12. A heater has hot and arcing or sparking parts inside. Do not use heater in
areas where gasoline, paint or flammable liquids are used or stored.
13. Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause fire, electric shock, or injury
to persons.
14. Never clean this heater while it is plugged in. Do not immerse in water. To
disconnect, turn the control to OFF, then remove the plug from the outlet by
grasping it and pulling it from the outlet. Never yank on the cord.
15. This heater includes an overheat protection system that shuts off the unit
when parts are becoming excessively hot. If the heater shuts off,
immediately turn it OFF and inspect for any objects on or adjacent to the
heater which may cause high temperatures. DO NOT OPERATE THE
HEATER UNTIL IT IS RESET. To reset the heater, turn it OFF, unplug it from
the electrical outlet, and wait five to ten minutes for the unit to cool down
before plugging it back in and turning the heater on.
Loading ...
Loading ...
Loading ...