Loading ...
Loading ...
Loading ...
Sani Rinse
This high temperature option sanitizes your dishes
and glassware in accordance with National
Sanitation Foundation (NSF)/ANSI Standard 184
for Residential Dishwashers. Certified residential
dishwashers are not intended for licensed food
establishments. The word Sanitized will light at the
end of the cycle when successfully completed. If
Sanitization is not achieved (most often due to
cycle interruption) the word Sanitized will flash.
Turbo Heat Dry
Turns the heat element and fan on after the wash
oortion of the cycle is over. The fan may remain on
after the overall cycle is complete for a period of
time or until the door is opened. Use rinse aid with
or without the Turbo Heat Dry option for best
drying results. Plastic items are less likely to
deform when loaded in the top dish rack.
HE
SmartWash ®
Pots& Pans
Normal Wash
Available with
any cycle
except
Quick Rinse
Raises the main wash
temperature to 135°F
(57°C) and the final rinse
temperature to 156°F
(69°C).
Turns the heat element and
the fan on at the end of
the wash portion of the
cycle.
0:05 to 1:01
0:08 to 0:46
_The maximum additional water used for any combination of options is 4.8 gal. (18.2 L).
0 - 3.9
(0- 14.6)
0
Delay Hours (on some models)
Use this option to run your dishwasher during off-peak hours. Local utility providers recommend using energy during off-peak hours
when possible. Delay displays how many hours Before the cycle will begin.
To delay the start
1. Select a wash cycle and options.
2. Press the delay button. Each time you press the DELAY button it will display the next available delay time.
NOTE: The dishwasher remembers the last Delay you selected. To reset the delay time to something other than what is displayed
continue to press the Delay button until the desired delay time is reached.
3. Press START/RESUME to begin the delay countdown.
NOTE: Anytime the door is opened (such as, to add a dish), the START/RESUME button must be pressed again to resume the delay
countdown.
Control Lock Option
Use the Control Lock option to avoid unintended use of the dishwasher between cycles. When the Lock indicator is lit, all buttons
are disabled. The dishwasher door can still be opened or closed while the controls are locked.
To turn on the Lock
Press and hold SANI RINSE for 3 seconds. The Lock indicator will light up. If you press any pad while your dishwasher is locked, the
light flashes 3 times.
NOTE: The dishwasher cannot start if the control is locked.
To turn off the Lock
Press and hold SANI RINSE for 3 seconds. The light turns off.
16
Loading ...
Loading ...
Loading ...