Loading ...
Loading ...
Loading ...
www.HunterFan.com
1.888.830.1326
Troubleshooting
Lights dim when turned on or
do not turn on at all.
• Make sure the wattage of the
light bulbs installed matches
the specications on the light
sockets.
Fan doesn’t work
• Make sure power switch is on.
• Push the motor reversing switch
rmly left or right to ensure that
it is engaged.
• Check the circuit breaker to
ensure the power is turned on.
• Make sure the blades spin freely.
• Turn off power from the circuit
breaker, then loosen the canopy
and check all the connections
according to the wiring diagram
on page 8-9.
• Check the plug connection in
the switch housing.
Excessive wobbling
• Make sure the blades are
securely attached to the
blade irons according to the
blade assembly instructions
provided.
• Use the provided balancing
kit and instructions to
balance the fan.
Remote control of fan is erratic
• Make sure the battery is
installed correctly.
• Install a fresh battery.
Transmitter only works when
held at close range
• Change battery.
Noisy operation
• Check to see if any of the blades
are cracked. If so, replace all of
the blades.
If you have multiple remotes or
multiple remote-controlled fans
installed on the same circuit
breaker and you are experiencing
interference or faulty operation of
your remote controls, please go to
www.HunterFan.com/FAQs
and click “How do I properly install
multiple remote-controlled fans?”
for information on how to correct
this issue.
19
M3615-01 • 08/16/16 • © 2016 Hunter Fan Company