Loading ...
Loading ...
Loading ...
10
Left Hinge Left Hinge Cover
Left Stop Block*2 Left Door Stopper*2
Note: If required you may lay the
refrigerator on its back in order to gain
access to the base, you should rest it on
soft foam packaging or similar material to
avoid damaging the backboard of the
refrigerator. To reverse the door, the
following steps generally recommended.
1. Stand the refrigerator upright. Open the
door to remove all door racks (to avoid
damage) and then close the door.
Caution!
Please slightly squeeze the door rack
from two sides toward center and inside
of door rack, and then move it upward
when taking out the upper rack and
lower rack.
2. Remove right upper hinge cover
①
top of the cabinet. Remove the 3 screws
②
which are used for fixing the right
upper hinge part (see the picture below)
and take down the upper hinge parts
③
3. Remove screw cover from the
left-front corner of cabinet with
thin-blade screwdriver and install screw
cover-right to the right front corner. Put
the upper hinge cover(right) and upper
hinge part (right) into the plastic bag.
4. Remove the upper door from the
middle hinge by carefully lifting the door
straight up.
5. Place the upper door on a smooth
surface with its panel upwards.
Loose screw
③
and take down part
②
and part
①
,Install replacement
door stopper-left provided (in the
Left Middle Hinge
Loading ...
Loading ...
Loading ...