Loading ...
Loading ...
Loading ...
45
503536
REMOVING AND INSERTING THE OVEN
DOOR
1
First, fully open the door (as far as it will
go).
2
A Rotate the stoppers all the way back
(in case of conventional closing).
B With soft closing system, rotate the
stoppers back by 90°.
3
Slowly close the door until the stoppers
are aligned with the hinge beds. At the
angle of 15° (relative to the closed door
position), slightly lift the door and pull it out
from both hinge beds on the appliance.
To replace the door, observe the
reverse order. If the door does not open or
close properly, make sure the notches on
the hinges are aligned with the hinge beds.
SOFT DOOR CLOSING (depending on the model)
Oven door is fitted with a system that dampens the door closing force, starting at the
75-degree angle. It allows simple, quiet, and smooth closing of the door. A gentle push
(to a 15-degree angle relative to the closed door position) is enough for the door to close
automatically and softly.
If the force applied to close the door is too strong, the effect of
the system is reduced or the system will be bypassed for safety.
When replacing the door, always make sure the hinge retainers
are correctly placed in the hinge beds to prevent sudden closing
of the main hinge which is connected to a strong main spring. If
the main spring is engaged, there is a risk of injury.
Loading ...
Loading ...
Loading ...