Loading ...
Loading ...
Loading ...
49-90506
About reversing the door.
Hotpoint.com
Reversing the Door
Toolsneeded.
[] Standard #2 [] Tape-tipped
Phillipsscrewdriver putty knife
rl1 open the door and remove the filler plugs opposite the
hinges.With the door completely open, remove the bottom
screw from each hinge on the dryer face. Insert these
screws about half way into the TOPholes,for each hinge,
on the opposite side (whereyou removed the filler plugs).
Applyfirm pressureto get the screw started in new holes.
r_ Loosentop screw from each hinge on the dryerface half
way. With one hand holding the top of the door and the
other hand holding the bottom, remove the door from the
dryer by lifting it UPand OUT.
r_ Removethe blind plate from the hinge side ofthe dryer by
removing itstwo screws. Removethe strike plate from the
opposite side of the dryer by removing its two screws.
Reinstallthe plates,on the opposite sides,usingtwo screws
in each plate.
REMOVE 4 PLUGS AND KEEP
FOR INSERTION INTO
THE OPPOSITE SIDE __N
LOOSEN EACH TOP HINGE _..,"""'--'A'_ _'_.
REE oT JAJ20 LIFT/
REMOVE BOTTOM SCREW FROM EACH HINGE
AND INSTALL HALF WAY INTO EACH TOP OF
OPPOSITE HINGE HOLES .
r-4-]Rotatethe door 180°.Insert it on the opposite side of the
opening by moving the door IN and DOWN until the top
hinge and the bottom hinge are resting on the top screws
inserted in step 1.
ROTATE DOOR 180 ° AND HANG
IT ON TOP HINGE SCREWS
rs] Removethe remaining screws from the sideof the opening
from which the door was removed. With these screws,
secureeach hinge at the bottom. Tightenthe two top screws
of each hinge. Reinsertthe plastic plugs on the side from
which the door was removed.
INSTALLANDTIGHTEN BOTTOM INSERT PLUGS
_N SCREWS AND TIGHTEN TOP INTO HOLES ON
_/__ OPPOSITE SIDE
Loading ...
Loading ...
Loading ...