Viking VGSC548 48"W. Sealed Burner Self

Product's Documents

Below are documents related to this product, you can read online or download:
User Manual Installation Instruction
  • Installation Instructions - (English) Download
  • LP/Propane Conversion Kit - LPKPDR - Installation Instructions - (English) Download
  • 48"W./8"H. Backguard - P48BG8 - Installation Instructions - (English) Download
  • 48"W. Countertop Rear Trim - P48CRT - Installation Instructions - (English) Download
  • 24"W. Countertop Side Trim - P24CST - Installation Instructions - (English) Download
Other Documents
VGSC548 photo

User Manual

This is the main product document for model VGSC548.

The file format is pdf, 32 pages, you can download this manual here .

background
Use & Care
Professional Freestanding Sealed Burner Gas Ranges
VGCC530 / VGCC536 / VGCC548 /
VGCC560
CVGCC530 / CVGCC536 / CVGCC546 / CVGCC560
background
Cleaning and Maintenance ______________________________________________________________________________25
Replacing Oven Lights __________________________________________________________________________________26
Door Removal __________________________________________________________________________________________27
Door Replacement and Adjustment ______________________________________________________________________27
Troubleshooting ________________________________________________________________________________________28
Service Information ____________________________________________________________________________________29
Warranty ______________________________________________________________________________________________30
C
ongratulations
Congratulations and welcome to an elite world of ownership. We hope you will enjoy and appreciate the care and
attention we have put into every detail of your new, state-of-the-art range.
Your range is designed to offer years of reliable service. This Use and Care Manual will provide you with the information
you need to become familiar with your ranges care and operation.
Your complete satisfaction is our ultimate goal. If you have any questions or comments about this product, please
contact the dealer from whom you purchased it, or contact our Consumer Support Center at 1-888-845-4641.
We appreciate your choice of our product and hope that you will again select our products for your other major
appliance needs.
For more information about the complete and growing selection of products, contact your dealer or visit us online at
vikingrange.com in the US or brigade.ca in Canada
Table of Contents
Getting Started
Warnings ______________________________________________________________________________________________3
Before Using Range ______________________________________________________________________________________7
Product Controls
Range Features ________________________________________________________________________________________8
Oven Functions and Settings ______________________________________________________________________________9
Operation
Surface Operation ______________________________________________________________________________________10
Lighting Burners ______________________________________________________________________________________10
Surface Burners-Automatic Reignition __________________________________________________________________10
Vari-Simmer™ ________________________________________________________________________________________10
TruPower Plus™ Burner (where applicable) ______________________________________________________________10
Surface Cooking Tips__________________________________________________________________________________11
Griddle/Simmer Plate Operation________________________________________________________________________12
Griddle/Simmer Plate Clean Up & Care__________________________________________________________________12
Grill Operation ______________________________________________________________________________________14
Grill Clean Up & Care ________________________________________________________________________________14
Oven Features__________________________________________________________________________________________17
Rack Positions ________________________________________________________________________________________17
Using the Oven ________________________________________________________________________________________17
Conventional and Convection Cooking __________________________________________________________________17
Baking ________________________________________________________________________________________________18
BAKE (Natural Airflow Bake)____________________________________________________________________________18
CONVECTION BAKE__________________________________________________________________________________18
Broiling ________________________________________________________________________________________________22
BROIL (Infrared Broil) __________________________________________________________________________________22
CONVECTION BROIL (Infrared Convection Broil) ________________________________________________________22
Convection Dehydrate __________________________________________________________________________________24
Convection Defrost ____________________________________________________________________________________24
Product Care
2
background
3
Warnings
Warning and Important Safety Instructions appearing in this manual are not meant to cover all possible conditions and
situations that may occur. Common sense, caution, and care must be exercised when installing, maintaining, or operating
the appliance.
ALWAYS contact the manufacturer about problems or conditions you do not understand.
Recognize Safety Symbols, Words, Labels
Read and follow all instructions before using this appliance to prevent the potential risk of fire, electric shock, personal injury or
damage to the appliance as a result of improper usage of the appliance. Use appliance only for its intended purpose as described
in this manual.
To ensure proper and safe operation: Appliance must be properly installed and grounded by a qualified technician. DO NOT
attempt to adjust, repair, service, or replace any part of your appliance unless it is specifically recommended in this manual. All
other servicing should be referred to a qualified servicer. Have the installer show you the location of the gas shutoff valve and how
to shut it off in an emergency. A certified technician is required for any adjustments or conversions to Natural or LP gas.
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Hazards or unsafe practices which WILL result in
severe personal injury or death
Hazards or unsafe practices which COULD result in
death or severe personal injury
DANGER
Hazards or unsafe practices which COULD result in
minor personal injury.
All safety messages will identify the hazard, tell you how
to reduce the chance of injury, and tell you what can happen if
the instructions are not followed.
WARNING
CAUTION
WARNING
If the information in this manual is not followed
exactly, a fire or explosion may result causing
property damage, personal injury or death.
WHAT TO DO IF YOU SMELL GAS:
DO NOT try to light any appliance.
DO NOT touch any electrical switch.
DO NOT use any phone in your building.
• Immediately call your gas supplier from a neighbor's
phone. Follow the gas supplier's instructions.
• If you cannot reach your gas supplier, call the fire
department.
Installation and service must be performed by a qualified
installer, service agency or the gas supplier.
WARNING
TIPPING HAZARD
To reduce the risk of the appliance tipping,
it must
be secured by a properly installed anti-tip
bracket(s). To make sure the bracket has been installed
properly, look behind the range with a flashlight to verify
proper installation engaged in the rear top left corner of the
range.
• THIS RANGE CAN TIP
• INJURIES TO PERSONS CAN RESULT
INSTALL ANTI-TIP DEVICE PACKED WITH RANGE
• SEE INSTALLATION INSTRUCTIONS
background
4
WARNING
To avoid risk of property damage, personal injury or death;
follow information in this manual exactly to prevent a fire or
explosion. DO NOT store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any appliance.
Warnings
To Prevent Fire or Smoke Damage
Be sure all packing materials are removed from the appliance before operating it.
Keep area around appliance clear and free from combustible materials, gasoline, and other flammable vapors and materials.
If appliance is installed near a window, proper precautions should be taken to prevent curtains from blowing over burners.
NEVER leave any items on the rangetop. The hot air from the vent may ignite flammable items and may increase pressure in closed
containers which may cause them to burst.
Many aerosol-type spray cans are EXPLOSIVE when exposed to heat and may be highly flammable. Avoid their use or storage near an
appliance.
Many plastics are vulnerable to heat. Keep plastics away from parts of the appliance that may become warm or hot. DO NOT leave
plastic items on the rangetop as they may melt or soften if left too close to the vent or a lighted surface burner.
Combustible items (paper, plastic, etc.) may ignite and metallic items may become hot and cause burns.
DO NOT
pour spirits
over hot foods.
DO NOT
leave oven unsupervised when drying herbs, breads, mushrooms, etc; fire hazard.
In Case of Fire
Turn off appliance and ventilating hood to avoid spreading the flame. Extinguish flame then turn on hood to remove smoke and odor.
Cooktop: Smother fire or flame in a pan with a lid or cookie sheet.
NEVER pick up or move a flaming pan.
Oven: Smother fire or flame by closing the oven door. DO NOT use water on grease fires. Use baking soda, a dry chemical or foam-
type extinguisher to smother fire or flame.
GREASE–Grease is flammable and should be handled carefully.
DO NOT
use water on grease fires. Flaming grease can be
extinguished with baking soda or, if available, a multipurpose dry chemical or foam type extinguisher. Let fat cool before
attempting to handle it.
DO NOT
allow grease to collect around the oven or in vents. Wipe up spillovers immediately.
Child Safety
NEVER leave children alone or unsupervised near the appliance when it is in use or is still hot.
NEVER allow children to sit or stand on any part of the appliance as they could be injured or burned.
DO NOT store items of interest to children over the unit. Children climbing to reach items could be seriously injured.
Children must be taught that the appliance and utensils in it can be hot. Let hot utensils cool in a safe place, out of reach of small
children. Children should be taught that an appliance is not a toy. Children should not be allowed to play with controls or other parts of
the appliance.
Cooking Safety
To eliminate the hazard of reaching over hot surface burners, cabinet storage should not be provided directly above a unit. If storage is
provided, it should be limited to items which are used infrequently and which are safely stored in an area subjected to heat from an
appliance. Temperatures may be unsafe for some items, such as volatile liquids, cleaners or aerosol sprays.
ALWAYS
place a pan on a surface burner before turning it on. Be sure you know which knob controls which surface burner. Make sure
the correct burner is turned on and that the burner has ignited. When cooking is completed, turn burner off before removing pan to
prevent exposure to burner flame.
ALWAYS
adjust surface burner flame so that it does not extend beyond the bottom edge of the pan. An excessive flame is hazardous,
wastes energy and may damage the appliance, pan or cabinets above the appliance. This is based on safety considerations.
NEVER leave a surface cooking operation unattended especially when using a high heat setting or when deep fat frying. Boilovers
cause smoking and greasy spillovers may ignite. Clean up greasy spills as soon as possible. DO NOT use high heat for extended
cooking operations.
DO NOT heat unopened food containers, build up of pressure may cause the container to explode and result in injury.
Use dry, sturdy pot-holders. Damp pot-holders may cause burns from steam. Dishtowels or other substitutes should NEVER be used as
potholders because they can trail across hot surface burners and ignite or get caught on appliance parts.
ALWAYS
let quantities of hot fat used for deep fat frying cool before attempting to move or handle.
DO NOT let cooking grease or other flammable materials accumulate in or near the appliance, hood or vent fan. Clean hood frequently
to prevent grease from accumulating on hood or filter. When flaming foods under the hood, turn the fan off.
NEVER wear garments made of flammable material or loose fitting or long-sleeved apparel while cooking. Clothing may ignite or catch
utensil handles. DO NOT
drape towels or materials on oven door handles. These items could ignite and cause burns.
background
5
Warnings
Cooking Safety
(cont.)
ALWAYS
place oven racks in the desired positions while oven is cool. Slide oven rack out to add or remove food, using dry, sturdy pot-
holders.
ALWAYS
avoid reaching into the oven to add or remove food. If a rack must be moved while hot, use a dry pot-holder.
ALWAYS turn the oven off at the end of cooking.
Use care when opening the oven door. Let hot air or steam escape before moving or replacing food.
NEVER use aluminum foil to cover oven racks or oven bottom. This could result in risk of electric shock, fire, or damage to the
appliance. Use foil only as directed in this guide.
PREPARED FOOD WARNING:
Follow food manufacturer's instructions. If a plastic frozen food container and/or its cover distorts, warps,
or is otherwise damaged during cooking, immediately discard the food and its container. The food could be contaminated
.
If you are “flaming” liquor or other spirits under an exhaust, TURN THE FAN OFF. The draft could cause the flames to spread
out of control.
Once the unit has been installed as outlined in the Installation Instructions, it is important that the fresh air supply is not
obstructed. The use of a gas cooking appliance results in the production of heat and moisture in the room in which it is installed.
Ensure that the kitchen is well-ventilated. Keep natural venting holes open or install a mechanical ventilation device. Prolonged or
intensive use of the appliance may call for additional (such as opening a window) or more effective ventilation (such as increasing
the level of a mechanical ventilation if present).
Utensil Safety
Use pans with flat bottoms and handles that are easily grasped and stay cool. Avoid using unstable, warped, easily tipped or loose-
handled pans. Also avoid using pans, especially small pans, with heavy handles as they could be unstable and easily tip. Pans that are
heavy to move when filled with food may also be hazardous.
Be sure utensil is large enough to properly contain food and avoid boilovers. Pan size is particularly important in deep fat frying. Be sure
pan will accommodate the volume of food that is to be added as well as the bubble action of fat.
To minimize burns, ignition of flammable materials and spillage due to unintentional contact with the utensil, DO NOT extend handles
over adjacent surface burners. ALWAYS turn pan handles toward the side or back of the appliance, not out into the room where they
are easily hit or reached by small children.
NEVER let a pan boil dry as this could damage the utensil and the appliance.
Follow the manufacturer's directions when using oven cooking bags.
Only certain types of glass, glass/ceramic, ceramic or glazed utensils are suitable for rangetop surface or oven usage without breaking
due to the sudden change in temperature. Follow manufacturer's instructions when using glass.
This appliance has been tested for safe performance using conventional cookware. DO NOT use any devices or accessories that are not
specifically recommended in this guide. DO NOT use eyelid covers for the surface units, stovetop grills, or add-on oven convection
systems. The use of devices or accessories that are not expressly recommended in this manual can create serious safety hazards, result
in performance problems, and reduce the life of the components of the appliance.
The flame of the burner should be adjusted to just cover the bottom of the pan or pot. Excessive burner setting may cause
scorching of adjacent counter-top surfaces, as well as the outside of the utensil. This is based on safety considerations.
Heating Elements
NEVER touch oven bake and broil burner areas or interior surfaces of oven.
Bake and broil burners may be hot even though they are dark in color. Areas near burners and interior surfaces of an oven may become
hot enough to cause burns.
During and after use, DO NOT touch or let clothing or other flammable materials contact heating elements, areas near elements, or
interior surfaces of oven until they have had sufficient time to cool.
Other surfaces of the oven may become hot enough to cause
burns, such as the oven vent opening, the surface near the vent opening, and the oven door window.
Cleaning Safety
Turn off all controls and wait for appliance parts to cool before touching or cleaning them. DO NOT touch the burner grates or
surrounding areas until they have had sufficient time to cool.
Clean appliance with caution. Use care to avoid steam burns if a wet sponge or cloth is used to wipe spills on a hot surface. Some
cleaners can produce noxious fumes if applied to a hot surface.
DO NOT
clean door gasket. It is essential for a good tight seal. Care should be taken not to rub, damage, or move the gasket.
No commercial oven cleaner or oven liner protective coating such as aluminum foil should be used in or around any part of the
oven. Improper oven liners may result in a risk of electric shock or fire. Keep oven free from grease buildup.
background
Warnings
6
Important Safety Notice and Warning (State of California Proposition 65)
WARNING: This product contains one or more chemicals known to the State of California to cause cancer.
WARNING: This product contains one or more chemicals known to the State of California to cause birth defects or other reproductive
harm.
Important notice regarding pet birds:
NEVER keep pet birds in the kitchen or in rooms where the fumes from the kitchen could reach. Birds have a very sensitive respiratory
system. Fumes released during an oven self-cleaning cycle may be harmful or fatal to birds. Fumes released due to overheated cooking
oil, fat, margarine and overheated non-stick cookware may be equally harmful.
About Your Appliance
For proper oven performance and operation, DO NOT block or obstruct the oven vent duct located on the right side of the air grille.
Avoid touching oven vent area while oven is on and for several minutes after oven is turned off. When the oven is in use, the vent and
surrounding area become hot enough to cause burns. After oven is turned off, DO NOT touch the oven vent or surrounding areas until
they have had sufficient time to cool.
Other potentially hot surfaces include rangetop, areas facing the rangetop, oven vent, surfaces near the vent opening, oven door, areas
around the oven door and oven window.
The misuse of oven doors (e.g. stepping, sitting, or leaning on them) can result in potential hazards and/or injuries.
Power Failure
If power failure occurs, the electric igniters will not work. No attempt should be made to operate the appliance during a power failure.
Make sure the oven control is in the “OFF” position.
Momentary power failure can occur unnoticed. The range is affected only when the power is interrupted. When it comes back on, the
range will function properly without any adjustments. A “brown-out” may or may not affect range operation, depending on how severe the
power loss is.
WARNING
POWER FAILURE WARNING
Due to safety considerations and the possibility of personal
injury in attempting to light and extinguish the burner, the grill
should, not under any circumstances, be used during a power
failure. The grill burner control should always remain in the “OFF”
position during a power failure.
WARNING
NEVER use appliance as a space heater to heat or warm a room to
prevent potential hazard to the user and damage to the appliance.
Also, DO NOT use the rangetop or oven as a storage area for food
or cooking utensils.
WARNING
ELECTRICAL SHOCK HAZARD
DO NOT
touch a hot oven light bulb with a damp
cloth as the bulb could break. Should the bulb break,
disconnect power to the appliance before removing bulb to
avoid electrical shock.
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main fuse or
circuit breaker before replacing bulb.
WARNING
NEVER
cover any slots, holes or passages in the oven bottom
or cover an entire rack with materials such as aluminum foil.
Doing so blocks air flow through the oven and may cause
carbon monoxide poisoning. Aluminum foil linings may also trap
heat, causing a fire hazard.
NOTICE
DO NOT turn the Temperature Control on during defrosting.
Turning the convection fan on will accelerate the natural
defrosting of the food without the heat.
CAUTION
BURN HAZARD
The oven door, especially the glass, can get hot.
Danger of burning: DO NOT touch the glass!
background
7
Warnings
WARNING
CAUTION
To avoid sickness and food waste, DO NOT allow defrosted
food to remain in the oven for more than two hours.
BURN OR ELECTRICAL SHOCK HAZARD
Make sure all controls are OFF and oven is COOL
before cleaning. Failure to do so can result in burns
or electrical shock.
CAUTION
DO NOT store items of interest to children over the unit.
Children climbing to reach items could be seriously injured.
CAUTION
You must carefully check the food during the dehydration
process to ensure that it does not catch fire.
Before Using Range
All products are wiped clean with solvents at the factory to remove any visible signs of dirt, oil, and grease which may have
remained from the manufacturing process. Before starting to cook, clean the range thoroughly with hot, soapy water. There
may be some burn off and odors on first use of the appliance—this is normal.
Oven
Important! Before first use, wipe interior with soapy water and dry thoroughly. Then set the oven selector to bake,
the thermostat to 450°F, and operate for an hour.
All models include:
Five performance modes—including convection baking and convection broiling—providing air circulation for shorter
cooking times with even results.
Exclusive VSH™ Pro Sealed Burner System (Vari-Simmer™ to High)—combination of patented burner and top design
provide cleanability plus superior performance at simmer and high.
Exclusive one-piece tooled and porcelainized cooking surface contains spills for easy cleaning.
Convection baking with a hidden 30,000 BTU burner provides a fast, even baking for all your casserole dishes as well as
easy cleanup.
The 1500°F closed door, infrared broiler allows intense heat to sear delicate cuts of meat providing that restaurant taste.
Two lights illuminate the oven cavity with less glare.
Six rack positions and three racks provide ample space for your baking needs.
This appliance is certified by Star-K to meet strict regulations in conjunction with specific instructions found on www.star-
k.org
background
8
Automatic
Re-Ignition
Thermal-Convection
OVEN
Interior Oven
Light Switch
Left Rear Burner
Control Knob
(15,000 BTU)
Left Front Burner
Control Knob
(15,000 BTU)
Left Oven
Temperature
Indicator Light
Left Oven
Temperature
Control Knob
48” Four-Burner/Griddle model shown
2 3
1
1
5
4
7
Grill
Control
Knob
6
1. Four 15,000 BTU sealed burners with porcelain/
Cast iron caps and automatic ignition/Re-ignition
2. Island trim
3. Griddle (Optional)
4. Identification plate
5. 30” Oven-Two TruGlide racks/One standard tilt-proof rack/Six
rack positions
6. 18” Oven-Two standard tilt-proof racks/Six rack positions
7. Broiler pan–located inside oven
Range Features
background
9
Range Features
GRIDDLE OVEN
30” Four-Burner
36” Six-Burner
36” Four-Burner/Griddle
48” Six-Burner/Griddle
60” Six-Burner/Grill/Griddle
48” Eight Burner
Denotes models
which have a
TruPower Plus™
18,500 BTU Burner
Right Rear Burner
Control Knob
(15,000 BTU)
Right Front Burner
Control Knob
(15,000 BTU)
Right Oven
Temperature
Indicator Light
Right Oven
Temperature
Control Knob
Convection
Fan
Switch
Griddle
Control
Knob
Griddle
Indicator Light
background
Oven Functions and Settings
10
BAKE (Natural Airflow Bake)
Use this setting for baking, roasting, and casseroles.
CONVECTION BAKE
Use this setting to bake and roast foods at the same time with minimal taste transfer.
BROIL (Infrared Broil)
Use this setting for broiling dark meats at 1” thickness or less where rare or medium doneness is desired.
CONVECTION BROIL (Infrared Convection Broil)
Use this setting to broil thick cuts of meat.
Convection Dehydrate (CONVECTION BAKE)
Use this function to dehydrate fruits and vegetables.
Convection Defrost (CONVECTION BAKE)
Use this function to defrost foods.
Note: For more information on oven functions see “Operation” section.
Lighting Burners
All burners are ignited by electric ignition. There are no open-flame, “standing” pilots.
Surface Burners-Automatic Reignition
To light the surface burners, push and turn the appropriate control knob counter clockwise to any position.
This control is both a gas valve and an electric switch. Each burner will ignite at any “ON” position with the
automatic re-ignition system. If the flame goes out for any reason, the burner will automatically reignite if the gas is
still flowing. When gas is permitted to flow to the burner, the electric igniter start sparking. You should hear a “clicking” sound. If
you do not, turn off the control and check that the unit is plugged in and that the fuse or circuit breaker is not blown or tripped.
Within a few moments, enough gas will have traveled to the burner to light. When the burner lights, turn the burner control to
any position to adjust the flame size. Setting the proper flame height for the desired cooking process and selecting the correct
cooking vessel will result in superior cooking performance, while also saving time and energy.
Vari-Simmer™
Simmering is a cooking technique in which foods are cooked in hot liquids kept at or just barely below the boiling point of water.
Simmering ensures gentler treatment than boiling to prevent food from toughening and/or breaking up. The size of the pan and
the volume of food can have a significant effect on how high or low a flame is needed for simmering. For this reason, Viking
range and rangetop burners are engineered with a Vari-Simmer setting. The Vari-Simmer setting is not just one simmer setting,
but provides a variable range of simmer settings. This variable range of simmer settings allows you to adjust the flame height to
achieve the best simmer depending on the type and quantity of food being simmered. It is this ability that makes the Vari-
Simmer setting the most accurate and trustworthy simmer on the market.
TruPower Plus™ Burner (where applicable)
Certain model ranges are equipped with a TruPower Plus 18,500 BTU burner in the front right burner position. This burner is
designed to provide extra high heat output, especially when using large pans, and should be used for boiling large quantities or
if you need to bring something to a boild quickly. While the TruPower Plus burner has the extra power needed to bring large
quantities of liquid to a boil rapidly, it is also able to be turned down low enough to provide a very low and delicate simmer
making this burner the most versatile burner on the market.
Surface Operation
background
11
Surface Cooking Tips
Use low or medium flame heights when cooking in vessels that are poor conductors of heat, such as glass, ceramic, and
cast-iron. Reduce the flame height until it covers approximately 1/3 of the cooking vessel diameter. This will ensure more
even heating within the cooking vessel and reduce the likelihood of burning or scorching the food.
Reduce the flame if it is extending beyond the bottom of the cooking vessel. A flame that extends along the sides of the
vessel is potentially dangerous, heats the utensil handle and kitchen instead of the food, and wastes energy.
Reduce the flame height to the minimum level necessary to perform the desired cooking process. Remember that food
cooks just as quickly at a gentle boil as it does at a rolling boil. Maintaining a higher boil than is necessary wastes energy,
cooks away moisture, and causes a loss in food flavor and nutrient level.
The minimum pot or pan (vessel) diameter recommended is 6”
(15 cm). Use of pots or pans as small as 4” (10 cm) is possible but not recommended.
Surface Heat Settings*
Heat Setting Use
Simmer
Melting small quantities
Steaming rice
Simmering sauces
Low
Melting large quantities
Med Low
Low-temperature frying (eggs, etc.)
Simmering large quantities
Heating milk, cream sauces, gravies,
and puddings
Med
Sauteing and browning, braising, and
pan-frying
Maintaining slow boil on large quantities
Med High
High-temperature frying
Pan broiling
Maintaining fast boil on large quantities
High
Boiling water quickly
Deep-fat frying in large utensil
Surface Operation
*Note: The above information is given as a guide only. You may need to
vary the heat settings to suit your personal requirements.
Cooking Vessels
Each cook has his or her own preference for the particular cooking vessels that are most appropriate for the type of cooking
being done. Any and all cooking vessels are suitable for use in the range and it is not necessary to replace your present
domestic vessels with commercial cookware. This is a matter of personal choice. As with any cookware, yours should be in
good condition and free from excessive dents on the bottom to provide maximum performance and convenience.
Note: When using big pots and/or high flames, it is recommended to use the front burners. There is more room in the front and
potential cleanup at rear of appliance due to staining or discoloration will be minimized.
background
12
Griddle/Simmer Plate (on applicable models)
The optional 15,000 BTU griddle is constructed of machined steel with a blanchard finish and is uniquely designed to offer
excellent cooking performance as well as easy clean up. The griddle is equipped with an electronic thermostat to maintain an
even temperature across the griddle once the desired temperature has been set. The griddle has a power “ON” indicator light
which glows when the griddle thermostat has been turned on. This will cycle on and off as needed to indicate the thermostat is
maintaining the selected temperature. Before the griddle is used it is important to season the griddle. This seasoning process
will change the appearance of the griddle plate. However, it will also prevent food from sticking and protect the surface from
moisture.
Seasoning the Griddle Before the First Use
Scrub the griddle plate with a mixture of one quart warm water and 1/4 cup white vinegar, using a blue Scotch-Brite pad.
Dry thoroughly.
Wash griddle with warm, soapy water. Rinse off and dry thoroughly.
Season griddle by thinly coating the surface with approximately 1⁄2 to 1 teaspoon unsalted vegetable oil. Apply to entire
griddle using a paper towel or clean cloth. Let oil sit on griddle for approximately 1hour and then wipe with a clean cloth or
paper towel to absorb any residual oil. The griddle is now ready to be used.
Griddle/Simmer Plate Operation
Turn the griddle control knob counterclockwise to the desired temperature setting. The
power “ON” indicator light will glow indicating the griddle thermostat is on.
The double griddle has two thermostat control knobs which control separate burners
located beneath the griddle.
When the griddle has reached the desired temperature, the power “ON” indicator light will
turn off indicating the griddle is preheated to the selected temperature.
Use liquid cooking oil or butter for eggs, pancakes, French toast, fish and sandwiches to
prevent sticking.
Routinely scrape loose food particles with a metal spatula during cooking to make the
cleanup easier and to avoid the particles mixing with the food.
To turn the griddle off, turn the thermostat knob clockwise to the “OFF” position.
ALWAYS turn to the“OFF” position when not in use and lower the heat between cooking loads.
Note: On griddle model ranges, the griddle/simmer plate will not function during the self-clean cycle.
Griddle
Griddle
Grease trough
Griddle
Griddle Assembly
Surface Operation
Griddle/Simmer Plate Clean Up & Care
• It is not necessary to wash the griddle after every use. When light cooking is performed and AFTER the griddle has cooled,
simply wipe down the surface with a clean cloth or paper towel. The oils in the food which cooked on the griddle surface
will naturally season the griddle providing a “natural” non-stick surface.
• After heavy cooking is completed and the griddle is still warm enough to create steam, pour a small amount of club soda
at room temperature directly on the griddle. Using a metal spatula, pull oils and food particles toward the trough in front.
Wipe entire surface with a paper towel. Follow with the seasoning process of applying oil.
• Keeping the griddle well seasoned will prevent the griddle from developing surface rust. If the griddle is not used for a
period of time, it must be re-seasoned. The griddle must be re-seasoned each time after it is washed.
• Non-stick cooking spray is not recommended as it contains a high water content that has a tendency to burn quickly.
• Corn oil is not recommended as it has a high sugar level. It will caramelize and burn on the surface making it very difficult
to remove.
• After using the griddle, always remove the grease trough located in the front. Simply pull the trough towards you and lift
out. The trough or tray trap needs to be cleaned after each use. A fire hazard may occur if grease is accumulated in the
trough.
Note: It is normal for the griddle to darken over time. This is the sign of a well seasoned griddle.
Important: Never flood a hot griddle with cold water. This thermal shock promotes griddle warping and can cause the
griddle to crack if continued over a period of time.
• For heavy duty cleaning, Viking offers a Griddle Cleaning Kit (model #GCK). This fast and effective commercial grade
cleaning system will clean your griddle in a matter of minutes. To order, contact your local Viking dealer or order on the
our website at vikingrange.com in the US or brigade.ca in Canada.
background
13
Surface Operation
Food Temp (°F) Temp (°C)
Eggs
250-300 121-149
Bacon
300-325 149-163
Pancakes
375-400 191-205
French Toast
400 205
Fish Fillets
300 149
Hamburger
350 177
Steaks
350 177
Griddle Cooking Chart
Char-Grill (on applicable models)
The optional 18,000 BTU char-grill is equipped with a single piece, heavy-duty porcelainized cast-iron grill grate for easy
movement of grilling items. Beneath the grill grate are two slotted porcelainized flavor generator plates which are designed
to catch drippings and circulate a smoke flavor back into the food. Beneath the flavor generator plates is a two piece drip
pan which catches any drippings that might pass beyond the flavor generator plates. This unique grilling system is designed
to provide outdoor quality grilling indoors.
Char-Grill Assembly
Before using the char-grill, you will need to follow these steps to properly assemble the char-grill.
Remove the two flavor generator plates and grill grate from the cardboard packaging.
Position the flavor generator plates so that the tab on each plate is inserted in the right, rear hole and left, front hole on the
drip pans. (See char-grill assembly section on following pages.)
After the flavor generator plates are properly located, place the grill grate on top of the flavor generator plates. After this, the
char-grill is assembled and ready to use.
Char-Grill Operation
Turn the overhead ventilation on prior to turning the grill on.
Turn the grill knob counterclockwise to HI.
Always preheat the grill for 5-10 minutes before placing food on the grill grate.
Place food items on the grill, cook as desired.
To turn the grill off, turn the grill knob clockwise to the OFF position.
Char-Grill Cooking Tips
When grilling chicken, roasts, well-done steaks or chops and thick pieces of meat, sear on HI. Then, reduce the heat
setting to prevent excessive flare-up. This will allow the food to cook through without burning the outside.
• After steaks, chops, or hamburgers have been allowed to sear for approximately one minute, you may slide a spatula
under the meat and turn it approximately 90 degrees so that a waffle pattern will be seared onto the food.
• Use a metal spatula instead of tongs or a fork to turn the meat. A spatula will not puncture the meat allowing juices to
escape.
• Turn the meat over only once. Juices are lost when steaks, chops or hamburgers are turned several times. The best time to
turn the meat is after the juices have begun to bubble to the surface.
• To test for doneness, make a small slash in the center of the meat, not the edge. This will prevent loss of juices.
• Occasionally there may be flare-ups or flames above the grill due to drops of fat falling on the flavor generator plates. It is
normal to have some flare-up during grilling. Use a long handled spatula to move food to another area until the flames
subside.
• For ease of cleaning, leave the char-grill on for 10 minutes when finished grilling. This will help make cleanup easier once
the char-grill has cooled down.
background
14
Surface Operation
Grill
Two-piece
drip pan
BurnerBurnerBurner
Flavor-
generator
plates
Drip trayDrip trayDrip tray
Grill Assembly
Char-Grill Disassembly for Cleaning
Follow these steps to disassemble the char-grill for cleaning. Make sure the char-grill is completely cool before attempting
to disassemble for cleaning.
Remove the char-grill grate.
Remove the flavor-generator plates.
Remove the drip pan. Note that the drip pan is a two-piece drip pan.
Located beneath the burner is the drip tray. Under normal grilling circumstances very little if any grease will accumulate in
the drip tray. If any grease has accumulated in the drip tray, simply wipe out with a paper towel or damp cloth.
Char-Grill Clean Up & Care
Char-grill grates:
o May be cleaned immediately after cooking is complete and before turning off the flame. Before cleaning the grill, turn
the flame down to a lower setting such as “MED” or “LOW”. Use a soft bristle brush to scrub the grill grate. Dip the
brush frequently into a bowl of water. Steam is created as the water contacts the hot grate. The steam assists the
cleaning process by softening the food particles.
o For a thorough cleaning of the grill grate, use grill cleaner according to manufacturer’s directions and then soak 15-20
minutes in a hot water and mild detergent solution. After soaking, scrub with a blue Scotch-Brite
pad. DO NOT use a
steel wool pad or abrasive cleaner, for risk of damaging the porcelain finish. Dry thoroughly.
Flavor generator plates and drip pan:
o Scrape off all burned on debris. The flavor generator plates and drip pan are dishwasher safe. If you choose to not wash
these components in the dishwasher, then simply soak for 15-20 minutes in a hot water and mild detergent solution.
After soaking, scrub with a blue Scotch-Brite
pad.
background
15
Surface Operation
Grill Cooking Chart
Food
Weight or
thickness
Flame
size
Suggested
cooking
time (min)
Special instructions
and tips
BEEF
Hamburger 1/2”(1.3 cm) –
3/4” (1.9 cm)
Med 8 – 15 Grill, turning once
when juices rise
to the surface.
We recommend
that ground
chuck be used for
hamburgers, as
it will give you a
juicer hamburger
than ground
round. DO NOT
leave hamburgers
unattended since a
flare-up could
occur quickly.
STEAKS
Rib, Club, Porterhouse, T-Bone, Sirloin Remove excess fat
from edge. Slash
remaining fat at 2”
(5.1 cm) intervals to
keep edges from
curling. Grill,
turning once.
Rare
(140°F/60°C)
1” (2.5 cm)
1-1/2” (3.8 cm)
High
High
8 – 12
11 – 16
Medium
(160°F/71°C)
1” (2.5 cm)
1-1/2” (3.8 cm)
Med
High
12 – 20
16 – 25
Well-done
(170°F/77°C)
1” (2.5 cm)
1-1/2” (3.8 cm)
Med
High
20 – 30
25 – 35
Tenderloin
5 lbs. (2.3 kg) High 30 40 Remove surface fat
and connective
tissue. Fold over
thin end to form
uniformly thick
piece. Bind with
string. Grill, turning
to brown evenly.
Brush often with
melted butter,
margarine or oil.
Cook until rare.
background
16
Surface Operation
Grill Cooking Chart
Food
Weight or
thickness
Flame
size
Suggested
cooking
time (min)
Special instructions
and tips
PORK
Chops 1/2”(1.3 cm) Med 20 – 40 Remove excess fat
from edge. Slash
remaining at 2”
(5.1 cm) intervals to
keep edges.
1” (2.5 cm) Med 35 – 60
Ribs Med 45 – 60 Grill, turning
occasionally. During
the last few minutes,
brush barbecue
sauce, turning
several times.
Ham steaks
(fully cooked)
1/2” (1.3 cm) High 12 – 15 Remove excess fat
from edge. Slash
remaining fat at
two-inch intervals.
Grill, turning once.
Hot dogs Med 5 – 10 Slit skin before
cooking. Grill,
turning once.
POULTRY
Chicken
Broiler/Fryer
Halves or
Quarters
2 (0.9 kg) –
3 lbs. (1.4 kg)
High 60 – 90 Place skin side up.
Grill, turn, and
brush frequently
with melted butter,
margarine, oil, or
marinade.
Med 40 – 60
FISH AND SEAFOOD
Steaks
Halibut
Salmon
Swordfish
3/4” (1.9 cm) –
1” (2.5 cm)
Med to
High
8 – 15 Grill, turning once,
brush with melted
butter, margarine,
or oil to keep fish
moist.
Whole
Catfish
Trout
4 oz (113 g) –
8 oz (227 g)
Med to
High
12 – 20
background
17
Removable bottom
Broiler element
Convection fan
Oven racks
(2) TruGlide
(1) Standard
Oven lights
Bake burner
6
5
4
3
2
1
Rack Positions
Each 30” and 36” oven is equipped with two full extension glide racks and one standard tilt-proof rack. Each 18” oven is
equipped with three standard tilt-proof racks. All ovens have six rack positions. Position 6 is the farthest from the oven
bottom. Position 1 is the closest to the oven bottom. The racks can be easily removed and arranged at various levels. For
best results with conventional baking, DO NOT use more than one rack at a time. It is also recommended, when using two
racks, to bake with the racks in positions 2 and 4 or positions 3 and 5.
Oven Features
Conventional and Convection Cooking
Because of variations in food density, surface texture and consistency, some foods may be prepared more successfully using
the conventional bake setting. For this reason, conventional baking is recommended when preparing baked goods such as
custard. The user may find other foods that are also prepared more consistently in conventional bake. It is recommended to
use this function for single-rack baking.
Convection Cooking Tips
Convection cooking is a cooking technique which utilizes fan-forced
air to circulate throughout the entire oven cavity creating the optimum
cooking environment. Cooking with convection is intended when performing multi-rack baking and for heavier foods. Below
are some tips which will allow you to get the best results out of your oven when cooking with convection.
As a general rule, to convert conventional recipes to convection recipes, reduce the temperature by 25°F (10°C) when
using a convection cooking function.
Cooking times for standard baking and convection baking will be the same. However, if using convection to cook a single
item or smaller load, then it is possible to have 10-15% reduction in cooking time. (Remember convection cooking is
designed for multi-rack baking or cooking large loads.)
If cooking items which require longer than 45 minutes, then it is possible to see a 10-15% reduction in cooking time.
A major benefit of convection cooking is the ability to prepare foods in quantity. The uniform air circulation makes this
possible. Foods that can be prepared on two of three racks at the same time
include: pizza, cakes, cookies, biscuits, muffins, rolls, and frozen convenience foods.
For three-rack baking, use any combination of rack positions 2, 3, 4, and 5. For two-rack baking, use rack positions 2 and
4 or positions 3 and 5. Remember that the racks are numbered from bottom to top.
Using the Oven
background
18
BAKE
(Natural Airflow Bake)
Full power heat is radiated from the U-shaped bake burners in the bottom of the
oven cavity and is circulated with natural airflow. This function is recommended for
single rack baking. Many cookbooks contain recipes to be cooked in the conventional
manner. Conventional baking is suitable for dishes that require a high temperature.
Use this setting for baking and casseroles.
To Use BAKE Function
1. Arrange the oven rack in the desired position before turning
oven on.
2. Set the oven temperature control knob to desired temperature.
3. Close the door.
CONVECTION BAKE
Heat is radiated from the U- shaped bake burners in the bottom of the oven cavity.
The heated air is circulated by one motorized fan in the rear of the oven providing a
more even heat distribution. Multiple rack use is possible for the largest baking job.
When roasting, cool air is quickly replaced—searing meats on the outside and
retaining more juices and natural flavor on the inside with less shrinkage. This even
circulation of air equalizes the temperature throughout the oven cavity and
eliminates the hot and cold spots found in conventional ovens.
To Use CONVECTION BAKE Function
1. Arrange the oven rack in the desired position before turning oven on.
2. Set the oven temperature control knob to desired temperature and turn on the convection fan switch.
3. Close the door.
Baking Tips
Make sure the oven racks are in the desired position before you turn on the oven.
DO NOT open the door frequently during baking. Look through the door window to check doneness whenever possible. If
you must open the door, the best time is during the last quarter of the baking time.
Bake to the shortest time suggested and check for doneness before adding more time. For baked goods, a stainless steel
knife placed in the center of the product should come out clean when done.
Use the pan size and type recommended by the recipe to ensure best results. Cakes, quick breads, muffins, and cookies
should be baked in shiny, reflective pans for light, golden crusts. Avoid the use of old, darkened pans. Warped, dented,
stainless steel and tin-coated pans heat unevenly and will not give uniform baking results.
Pan Placement Tips
When using large (15" x 13") flat pans or trays that cover most of the rack, rack positions 2 or 3 produce the best results.
When baking on more than one rack, it is recommended to use the 3rd and 5th position for more consistent even baking.
Stagger pans in opposite directions when two racks and several pans are used in conventional bake. If possible, no pan should
be directly above another.
Allow 1 to 2 inches of air space around all sides of each pan for even air circulation.
natural airflow bake
convection bake
Baking
Single Rack Pan
Placement
Multiple Rack Pan
Placement
background
19
Baking
Conventional Baking Chart
Single Rack Time
Food Pan Size Position Temp
(min)
BREADS
Biscuits Cookie sheet 3 or 4 400˚ F (204˚ C) 10 - 12
Yeast loaf Loaf pan
3 or 4
375
˚ F (191˚ C)
30 - 35
Yeast rolls Cookie sheet
3 or 4
400
˚ F (204˚ C)
12 - 15
Nut bread Loaf pan
3 or 4
375
˚ F
(
191˚ C)
30 - 35
Cornbread 8" x 8"
3 or 4
400
˚ F (204˚ C)
25 - 30
Gingerbread 8" x 8"
3 or 4
350
˚ F (177˚ C)
35 - 40
Muffins Muffin tin
3 or 4
375
˚ F (191˚ C)
15 - 20
Corn muffins Muffin tin
3 or 4
375
˚ F (191˚ C)
15 - 20
CAKES
Angel food Tube pan 3 or 4 375
˚ F (191˚ C)
35 - 45
Bundt Tube pan 3 or 4 350
˚ F (177˚ C)
45 - 55
Cupcakes Muffin pan 3 or 4 350
˚ F (177˚ C)
16 - 20
Layer, sheet 13" x 9" 3 or 4 350
˚ F (177˚ C)
40 - 50
Layer, two 9" round 3 or 4 350
˚ F (177˚ C)
30 - 35
Pound Loaf pan 3 or 4 350
˚ F (177˚ C)
60 - 65
COOKIES
Brownies 13" x 9" 3 or 4 350
˚ F (177˚ C)
25 - 30
Choc. chip Cookie sheet 3 or 4 375
˚ F (191˚ C)
12 - 15
Sugar Cookie sheet 3 or 4 375
˚ F (191˚ C)
10 - 12
PASTRY
Cream puffs Cookie sheet 3 or 4 400
˚ F (204˚ C)
30 - 35
PIES
Crust, unfilled 9" round 3 or 4 400
˚ F (204 ˚ C)
10 - 12
Crust, filled 9" round 3 or 4 350
˚ F (191˚ C)
55 - 60
Lemon meringue 9" round 3 or 4 350
˚ F (177˚ C)
12 - 15
Pumpkin 9" round 3 or 4 350
˚ F (177˚ C)
35 - 40
Custard 6 - 4 oz cups 3 or 4 350
˚ F (177˚ C)
35 - 40
ENTREES
Egg rolls Cookie sheet 3 or 4 400
˚ F (204˚ C)
25 - 30
Fish sticks Cookie sheet 3 or 4 425
˚ F (218˚ C)
10 - 15
Lasagna, frz Cookie sheet 3 or 4 375
˚ F (191˚ C)
55 - 60
Pot pie Cookie sheet 3 or 4 400
˚ F (204˚ C)
35 - 40
Gr. peppers stuffed
13" x 9" 3 or 4 375
˚ F (191˚ C)
60 - 70
Quiche 9" round 3 or 4 400
˚ F (204˚ C)
25 - 30
Pizza, 12" Cookie sheet 3 or 4 400
˚ F (204˚ C)
15 - 20
Mac. & cheese, frz
Cookie sheet 3 or 4 375
˚ F (191˚ C)
35 - 40
VEGETABLES
Baked potatoes On rack 3 or 4 375
˚ F (191˚ C)
60 - 65
Spinach souffle 1 qt. casserole 3 or 4 350
˚ F (177˚ C)
45 - 50
Squash Cookie sheet 3 or 4 375
˚ F (191˚ C)
50 - 55
French fries Cookie sheet 3 or 4 425
˚ F (218˚ C)
20 - 25
*Note: The above information is given as a guide only.
background
*Note: The above information is given as a guide only.
Single Rack Time
Food Pan Size Position Temp
(min)
BREADS
Frozen Biscuits Cookie sheet 3 or 4
375
˚ F (191˚ C) 7 - 9
Yeast loaf Loaf pan 3 or 4
375
˚ F (191˚ C) 25 - 30
Yeast rolls Cookie sheet 3 or 4
375
˚ F (191˚ C) 11 - 13
Nut bread Loaf pan 3 or 4
350
˚ F (177˚ C) 25 - 30
Cornbread 8" x 8" 3 or 4
375
˚ F (191˚ C) 20 - 25
Gingerbread 8" x 8" 3 or 4
325
˚ F (163˚ C) 30 - 35
Muffins Muffin tin 3 or 4
350
˚ F (177° C) 12 - 15
Corn muffins Muffin tin 3 or 4
350
˚ F (177˚ C) 10 - 12
CAKES
Angel food Tube pan
3 or 4
350
˚ F (177˚ C)
35 - 40
Bundt Tube pan 3 or 4 325
˚ F (163˚ C)
35 - 40
Cupcakes Muffin pan
3 or 4
325
˚ F (163˚ C)
15 - 17
Layer, sheet 13" x 9"
3 or 4
325
˚ F (163˚ C)
30 - 35
Layer, two 9" round
3 or 4
325
˚ F (163˚ C)
25 - 30
Pound Loaf pan
3 or 4
325
˚ F (163˚ C)
45 - 50
COOKIES
Brownies 13" x 9"
3 or 4
325
˚ F (163˚ C)
20 -25
Choc. chip Cookie sheet
3 or 4
350
˚ F (177˚ C)
7 -10
Sugar Cookie sheet
3 or 4
350
˚ F (177˚ C)
7-10
PIES
Crust, unfilled 9" round
3 or 4
375
˚ F (191˚ C)
7 - 9
Crust, filled 9" round
3 or 4
325
˚ F (163˚ C)
50 - 55
Lemon meringue 9" round
3 or 4
325
˚ F (163˚ C)
10 - 12
Pumpkin 9" round
3 or 4
325
˚ F (163˚ C)
45 - 55
Custard Not recommended
ENTREES
Egg rolls Cookie sheet
3 or 4
375
˚ F (191˚ C)
15 - 20
Fish sticks Cookie sheet
3 or 4
400
˚ F (205˚ C)
8 - 10
Lasagna, frz Cookie sheet
3 or 4
350
˚ F (177˚ C)
45 - 50
Pot pie Cookie sheet
3 or 4
375
˚ F (191˚ C)
35 - 40
Gr. peppers stuffed
13" x 9"
3 or 4
350
˚ F (177˚ C)
45 - 50
Quiche
Not recommended
Pizza, 12" Cookie sheet
3 or 4
375
˚ F (191˚ C)
15 - 20
Mac. & cheese, frz
Cookie sheet 3 or 4 350
˚ F (177˚ C)
25 - 35
VEGETABLES
Baked potatoes On rack 3 or 4 350
˚ F (177˚ C)
50 - 55
Spinach souffle 1 qt. casserole 3 or 4 325
˚ F (163˚ C)
35 - 40
Squash Cookie sheet 3 or 4 350
˚ F (177˚ C)
40 - 45
French fries Cookie sheet 3 or 4 400
˚ F (205˚ C)
15 - 20
20
Convection Baking Chart
Baking
background
21
Baking
Solving Baking Problems
Baking problems can occur for many reasons. Check the chart below for the causes and remedies for the most common
problems. It is important to remember that the temperature setting and cooking times you are accustomed to using with
your previous oven may vary slightly from those required with this oven. If you find this to be true,
it is necessary for you to adjust your recipes and cooking times accordingly.
Problems Cause Remedy
Cakes burned on the 1. Oven was too hot 1. Reduce temperature
sides or not done
2. Wrong pan size 2. Use recom. pan size
in center
3. Too many pans 3. Reduce no. of pans
Cakes crack on top 1. Batter too thick 1. Follow recipe
2. Oven too hot Add liquid
3. Wrong pan size
2. Reduce temperature
3. Use recom. pan size
Cakes are not level 1. Batter uneven 1. Distribute batter even
2. Oven or rack not level 2. Level oven or rack
3. Pan was warped 3. Use proper pan
Food too brown on 1. Oven door opened 1. Use door window to
bottom too often check food
2. Dark pans being used 2. Use shiny pans
3.
Incorrect rack position
3.
Use recom. rack position
4. Wrong bake setting 4. Adjust to conventional
5. Pan too large
or convection setting
as needed
5. Use proper pan
Food too brown on 1. Rack position too high 1. Use recom. rack position
top
2. Oven not preheated 2. Allow oven to preheat
3. Sides of pan too high 3. Use proper pans
Cookies too flat 1. Hot cookie sheet 1. Allow sheet to cool
between batches
Pies burned around 1. Oven too hot 1. Reduce temperature
edges
2. Too many pans used 2. Reduce no. of pans
3. Oven not preheated 3. Allow oven to preheat
Pies too light on top 1. Oven not hot enough 1. Increase temperature
2. Too many pans used 2. Reduce no. of pans
3.
Oven not preheated
3.
Allow oven to preheat
Common Baking Problems/Remedies
background
BROIL (Infrared Broil)
The broil burner at the top of the oven heats the metal screen until it glows. Heat
radiates from the GourmetGlo™ infrared broiler located at the top of the oven
cavity. The distance between the foods and the broil elements determines broiling
speed. For “fast” broiling, food may be as close as 2 inches
(5 cm) to the broil element. “Fast” broiling is best for meats where rare to medium
doneness is desired. Use this setting for broiling small and average cuts of meat.
CONVECTION BROIL (Infrared Convection Broil)
The top burner operates at full power. This function is exactly the same as regular
broiling with the additional benefit of air circulation by the motorized fan in the rear
of the oven. Smoke is reduced since the airflow also reduces peak temperatures on
the food. Use this setting for broiling thick cuts of meats.
Broiling Instructions
Broiling is a dry-heat cooking method using direct or radiant heat. It is used for small, individualized cuts such as steaks,
chops, and patties. Broiling speed is determined by the distance between the food and the broil element. Choose the rack
position based on desired results.
Conventional broiling is most successful for cuts of meat 1-2 inches thick and is also more suitable for flat pieces of meat.
Convection broiling has the advantage of broiling food slightly quicker than conventional. Convection broiling of meats
produces better results, especially for thick cuts. The meat sears on the outside and retains more juices and natural flavor
inside with less shrinkage.
To Use Broil or Convection Broil
1. Arrange the oven rack in the desired position before turning
broiler on.
2. Center the food on cold broiler pan and grid supplied with your oven. Place broiler pan in oven.
3. Set the oven temperature control knob to “Broil”. Turn on the convection fan switch if you wish to convection broil.
4. Close the door. There is not a detent to hold the door in the open broil stop position. With open door broiling the broil
element does not cycle on and off. With closed door broiling the broil element might cycle on and off if an extended
broiling time is required. A built-in smoke "eliminator" in the top of the oven helps reduce smoke and odors.
Broiling Tips
ALWAYS use a broiler pan and grid for broiling. They are designed to provide drainage of excess liquid and fat away from
the cooking surface to help prevent splatter, smoke, and fire.
To keep meat from curling, slit fatty edge.
Brush chicken and fish with butter several times as they broil to prevent drying out. To prevent sticking, lightly grease
broiler tray.
Broil on first side for slightly more than half the recommended time, season, and turn. Season second side just before
removing.
ALWAYS pull rack out to stop position before turning or removing food.
Use tongs or a spatula to turn meats. NEVER pierce meat with a fork, as this allows the juices to escape.
Remove the broiler pan from the oven when you remove the food. Drippings will bake onto the pan if it is left in the
heated oven after broiling. While pan is hot, place damp paper towel over grid. Drizzle with liquid dishwashing detergent
and pour water over grid. This will make cleaning of the pan easier, or the broiler pan can be lined with aluminum foil to
make cleaning easier. Be sure the foil extends up the side of the pan. Although it is not recommended, the grid can also
be covered with foil. Be sure to slit openings to conform with the openings in the grid so melted fat can drain through to
prevent spattering, smoking, or the possibility of grease fire.
infrared broil
infrared convection broil
22
Baking
background
23
Broiling
Rack Positions for Broiling
Note: Position 6 is the closest to the broiler and position 1 is the closest to the oven bottom.
95%
80%
65%
50%
35%
25%
6
5
4
3
2
1
Broiling Chart
Note: The above information is given as a guide only.
Type and Time
Cut of Meat Weight Setting Rack (min)
BEEF
Sirloin, 1"
Rare 12 oz Broil 3 4
Medium 12 oz Broil 3 5
Well done 12 oz Broil 3 6
T-Bone, 3/4"
Rare 10 oz Broil 3 4
Medium 10 oz Broil 3 6
Well done 10 oz Broil 3 8
Hamburger, 1/2"
Medium 1/4 lb. Broil 3 6
Well done 1/4 lb. Broil 3 8
CHICKEN
Bnls breast, 1” 1/2 lb. Broil 3 15
Bnls breast, 1” 1/2 lb. Convection Broil 3 15
Bone-in breast 2 - 3 lbs total Broil 1 22
Bone-in breast 2 - 3 lbs total Convection Broil 1 20
Chicken pieces 2 - 3 lbs total Broil 3 22
Chicken pieces 2 - 3 lbs total Convection Broil 3 20
HAM
Ham slice, 1" 1 lb. Broil 3 10
LAMB
Rib chops, 1" 12 oz. Convection Broil 2 8
PORK
Loin chops, 3/4" 1 lb. Convection Broil 2 10
Bacon Broil 2 3
FISH
Salmon steak 1 lb. Broil 2 8
Fillets 1 lb. Broil 2 8
background
Convection Dehydrate
Convection Dehydrate
This oven is designed not only to cook, but also to dehydrate fruits and vegetables. Warm air is circulated by a motorized
fan in the rear
of the oven and over a period of time, the water is removed from
the food by evaporation. Removal of water inhibits growth of microorganisms and retards the activity of enzymes. It is
important to remember that dehydration does not improve the quality, so only fresh, top-quality foods should be used.
1. Prepare the food as recommended.
2. Arrange the food on drying racks (not included with the oven; contact a local store handling speciality cooking utensils).
3. Set the temperature control to 200°F (93.3°C) and turn on the convection fan switch.
CAUTION
You must carefully check the food during the dehydration process to
ensure that it does not catch fire.
24
Convection Defrost
Convection Defrost
Air is circulated by a motorized fan in the rear of the oven. The fan accelerates natural defrosting of the food without heat.
To avoid sickness and food waste, DO NOT allow defrosted food to remain in the oven for more than two hours.
1. Place the frozen food on a baking sheet.
2. Set the oven temperature control knob to “OFF” and turn on the convection fan switch.
WARNING
To avoid sickness and food waste, DO NOT allow defrosted food to
remain in the oven for more than two hours.
background
25
Any piece of equipment works better and lasts longer when maintained properly and kept clean. Cooking equipment is no
exception. Your range must be kept clean and maintained properly. Before cleaning, make sure all controls are in the “OFF”
position. Disconnect power if you are going to clean thoroughly with water.
Surface Burners
* Note: When replacing burner head, arrow must be pointing
towards back of range.
Wipe up spill-overs as soon as possible after they occur and before
they get a chance to burn in and cook solid. In the event of a spill-
over, follow these steps:
Allow the burner and grate to cool to a safe temperature level.
Lift off the burner grate. Wash in warm soapy water.
Remove the burner cap and burner head and clean.
Burner Caps
The surface burner caps should be routinely removed and cleaned.
ALWAYS clean the burner caps after a spill-over. Keeping the burner caps clean will prevent improper ignition and uneven
flames. To clean, pull burner cap straight up from the burner base. Wipe off surface burner caps with warm, soapy water and
a soft cloth after each use. Use a non-abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad for
cooked-on foods. Dry thoroughly after cleaning. For best cleaning and to avoid possible rusting, DO NOT clean in
dishwasher or self-cleaning oven.
Burner Head
If ports on burner head are clogged, clean with a straight pin.
DO NOT enlarge or distort the ports. DO NOT use a toothpick to clean the ports. When replacing burner head, carefully
align the 2 tabs underneath the burner head with the outside edge of burner base. Make sure the tabs are not aligned with
the igniter and the burner cap is level.
Note: For stubborn stains, use a non abrasive cleanser such as Bon Ami™ and a soft brush or soft Scotch Brite™ pad.
Cleaning Tip: For difficult to clean burner caps and heads, place parts in a zip seal bag with ammonia.
Burner Base
The base should be wiped regularly with hot soapy water at the end of each cooling period. DO NOT use steel wool,
abrasive cloths, cleanser, or powders. To remove encrusted materials, soak the area with a hot towel to loosen the material,
then use a wooden nylon spatula.
DO NOT use a metal knife, spatula, or any other metal tool to scrape the aluminum base.
• Wipe up any spills which remain on the sealed top surface.
• Replace burner cap, burner head, and grates after drying thoroughly.
Control Panel
DO NOT use any cleaners containing ammonia or abrasives. They could remove the graphics from the control panel. Use
hot, soapy water and a soft clean cloth.
Oven Surfaces
Several different finishes have been used in your oven.
NEVER USE AMMONIA, STEEL WOOL PADS OR ABRASIVE CLOTHS, CLEANSERS, OVEN CLEANERS, OR ABRASIVE
POWDERS. THEY CAN PERMANENTLY DAMAGE YOUR OVEN.
VGSC models Your oven features a self-clean cycle for the oven interior. See the “Self-Clean Cycle” section for complete
instructions.
Control Knobs
MAKE SURE ALL THE CONTROL KNOBS POINT TO THE OFF POSITION BEFORE REMOVING. Pull the knobs straight off.
Wash in detergent and warm water. Dry completely and replace by pushing firmly onto stem. DO NOT use any cleaners
containing ammonia or abrasives. They could remove the graphics from the knob.
Burner
grate
Burner
cap
Burner
head
Burner
base*
Igniter
Cleaning and Maintenance
background
Stainless Steel Parts
All stainless steel body parts should be wiped regularly with hot soapy water at the end of each cooling period and with a liquid
cleaner designed for that material when soapy water will not do the job. DO NOT use steel wool, abrasive cloths, cleansers, or
powders. If necessary, scrape stainless steel to remove encrusted materials, soak the area with hot towels to loosen the material,
then use a wooden or nylon spatula or scraper. DO NOT use a metal knife, spatula, or any other metal tool to scrape stainless
steel. DO NOT permit citrus or tomato juice to remain on stainless steel surface, as citric acid will permanently discolor
stainless steel. Wipe up any spills immediately.
Glass Surfaces
Clean with detergent and warm water. Glass cleaner can be used to remove fingerprints. If using glass cleaner ammonia,
make sure that it does not run down on exterior door surface.
Broiler Pan and Grid
Clean with detergent and hot water. For stubborn spots, use a soap-filled steel wool pad.
Oven Racks
Clean with detergent and hot water. Stubborn spots can be scoured with a soap-filled steel wool pad.
26
Cleaning and Maintenance
Replacing Oven Lights
DO NOT touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a soft cloth.
WARNING
ELECTRICAL SHOCK HAZARD
Disconnect the electric power at the main
fuse or circuit breaker before replacing bulb.
WARNING
DO NOT touch bulb with bare hands. Clean off any
signs of oil from the bulb and handle with a soft cloth.
1. Unsnap glass light cover using a screwdriver in the
access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage
requirements listed on glass cover.
4. Replace the light cover by snapping glass cover onto
metal box.
5. Reconnect power at the main fuse or circuit breaker.
access
groove
light
bulb
glass light
cover
background
27
Door Removal
1
2
3
4
Open door completely.
Place pin in pin hole.
Remove hinge trim screws
and hinge trim.
Close until pins stop door.
WARNING
TO PREVENT
PERSONAL INJURY
Before removing the doors,
make sure the pins are
properly installed in the hinges.
Failure to do so can result in
personal injury to hands
and/or fingers.
Lift door up and out.
Door Replacement and Adjustment
1
2
Reinstall door to range.
Open door completely.
Reinstall hinge trim.
3
4
Remove pins from hole in hinges.
5
If the door needs to be adjusted, loosen hinge trim
screws located in step 2. Adjust the screws located
between the door and kickplate using a 5/32” hex
head allen wrench. After adjustment, tighten hinge
trim screws.
Close door.
background
Troubleshooting
Problem
Possible Cause and/or Remedy
Range will not function.
Range is not connected to electrical power:
Have electrician check power circuit breaker,
wiring, and fuses.
Broil does not work.
Temperature control knob is rotated too far
past broil position.
Door will not open.
Oven is still in self-clean mode. If oven is
hot, door latch will release when safe
temperature is reached.
Oven light will not work.
Light bulb is burned out.
Range is not connected to power.
Igniters will not work.
Circuit is tripped.
Fuse is blown.
Range is not connected to power.
Igniters sparking but no
flame ignition.
Gas supply valve is in “OFF” position.
Gas supply is interrupted.
Igniters sparking
continuously after flame
ignition.
Power supply is not grounded.
Power supply polarity is reversed.
Igniters are wet or dirty.
Burner ignites but flame is
large, distorted, or yellow.
Burner ports are clogged.
Unit is being operated on wrong type of gas.
Air shutters not properly adjusted.
Strong odor and/or smoke
is noticed first few times
oven is used.
This is normal burn off of insulation and
protective oils in oven. This will go away
after using oven a few times.
Oven indicator light on;
oven will not heat
Oven is operating properly. Unit will resume
heating function once it has cooled.
28
background
Service Information
If service is required, call your authorized service agency.
Have the following information readily available.
• Model number
• Serial number
• Date purchased
Name of dealer from whom purchased
Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if
you continue to have service problems, contact Viking Range, LLC at 1-888-845-4641, or write to:
VIKING RANGE, LLC
PREFERRED SERVICE
111 Front Street
Greenwood, Mississippi 38930 USA
Record the information indicated below. You will need it if service is ever required. The model and serial
number for your range can be found by opening door and looking under the control panel. A duplicate label
is located on the back side of the range.
M o d e l n o . ________________________________________________________________ S e r i a l n o . ______________________________________
Date of purchase________________________________________ Date installed __________________________________
Dealer’s name __________________________________________________________________________________________
Address ________________________________________________________________________________________________
______________________________________________________________________________________________________
If service requires installation of parts, use only authorized parts to insure protection under the warranty.
Keep this manual for future reference.
29
background
30
*FULL NINETY (90) DA
Y COSMETIC WARRANTY: Product is warranted to be free from cosmetic
defects in materials or
workmanship (such as scratches on stainless steel, paint/porcelain blemishes, etc.) for a period of ninety (90) days from the
date of original retail purchase or closing date for new construction, whichever period is longer. Any defects must be
reported to the selling dealer within ninety (90) days from date of original retail purchase. Viking Range, LLC uses high
quality processes and materials available to produce all color finishes. However, slight color variation may be noticed
because of the inherent differences in painted parts and porcelain parts as well as differences in kitchen lighting, product
locations, and other factors. Therefore, this warranty does not apply to color variation attributable to such factors.
†FULL NINETY (90) DAY WARRANTY IN "RESIDENTIAL PLUS" APPLICATIONS: This full warranty applies to applications
where use of the product extends beyond normal residential use, but the warranty period for products used in such
applications is ninety (90) days. Examples of applications covered by this warranty are bed and breakfasts, fire stations,
private clubs, churches, yachts, etc. Under this "Residential Plus" warranty, the product, its components and accessories are
warranted to be free from defective material or workmanship for a period of ninety (90) days from the date of original retail
purchase. This warranty excludes use of the product in all commercial locations such as restaurants, food service locations
and institutional food service locations.
FI
VE YEAR LIMITED WARRANTY ON BURNERS
Any surface burner, griddle burner, grill burner, or oven burner which fails due to defective materials or workmanship (excluding
cosmetic failures) in normal household use during the third through fifth year from the date of original retail purchase will be repaired
or replaced, free of charge for the part itself, with the owner paying all other costs, including labor. This does not include ignition
systems, burner bases, etc.
TERMS AND CONDITIONS
This warranty extends to the original purchaser of the product warranted hereunder and to each transferee owner of the product
during the term of the warranty and applies to products purchased and located in the United States, Canada, Mexico, and the
Caribbean (excluding Cuba, Dominican Republic and Haiti). Products must be purchased in the country where service is requested. If
the product or one of its component parts contains a defect or malfunction during the full warranty period after a reasonable number
of attempts by the warrantor to remedy the defect or malfunction, the owner is entitled to either a refund or replacement of the
product or its component part or parts. Replacement of a component part includes its free installation, except as specified under the
limited warranty. Under the terms of this warranty, service must be performed by a factory authorized Viking Range, LLC service agent
or representative. Service will be provided during normal business hours, and labor performed at overtime or premium rates shall not
be covered by this warranty. Owner shall be responsible for proper installation, providing reasonable and necessary maintenance,
providing proof of purchase upon request, and making the appliance reasonably accessible for service. The return of the Owner
Registration Card is not a condition of warranty coverage. You should, however, return the Owner Registration Card so that Viking
Range, LLC can contact you should any question of safety arise which could affect you.
This warranty gives you specific legal rights, and you may also have other rights which may vary from jurisdiction to jurisdiction.
WHAT IS NOT COVERED BY THIS WARRANTY: This warranty shall not apply to damage resulting from abuse, failure to provide
reasonable and necessary maintenance, accident, delivery, negligence, natural disaster, loss of electrical power to the product for any
reason, alteration, outdoor use, improper installation, improper operation, or repair or service of the product by anyone other than an
authorized Viking Range, LLC service agency or representative. This warranty does not apply to commercial usage.
LIMITATION OF REMEDIES AND DURATION OF IMPLIED WARRANTY
OWNER’S SOLE AND EXCLUSIVE REMEDY FOR A CLAIM OF ANY KIND WITH RESPECT TO THIS PRODUCT SHALL BE THE
REMEDIES SET FORTH ABOVE.VIKING IS NOT RESPONSIBLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGE,
INCLUDING BUT NOT LIMITED TO FOOD OR MEDICINE LOSS, DUE TO PRODUCT FAILURE, WHETHER ARISING OUT OF
BREACH OF WARRANTY, BREACH OF CONTRACT OR OTHERWISE. Some jurisdictions do not allow the exclusion or limitation
of incidental or consequential damages, so the above limitation or exclusions may not apply to you. ANY IMPLIED WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE APPLICABLE TO THIS PRODUCT ARE LIMITED IN
DURATION TO THE PERIOD OF COVERAGE OF THE APPLICABLE EXPRESS WRITTEN LIMITED WARRANTIES SET FORTH
ABOVE. Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
WARRANTY SERVICE
To obtain warranty service, contact an authorized Viking Range, LLC service agent, or Viking Range, LLC, 111 Front Street,
Greenwood, Mississippi 38930, (888) 845-4641. Provide model and serial number and date of original purchase or closing date for a
new construction. For the name of your nearest authorized Viking Range, LLC service agency, call Viking Range, LLC.
IMPORTANT: Retain proof of original purchase to establish warranty period.
Specifications subject to change without notice.
Warranty
PROFESSIONAL SERIES
FREES
TANDING GAS RANGES WARRANTY
TWO YEAR FULL WARRANTY
Freestanding gas ranges and all of their component parts, except as detailed below*†, are warranted to be free from defective
materials or workmanship in normal residential use for a period of two (2) years from the date of original retail purchase or closing date
for new construction, whichever period is longer. Viking Range, LLC, warrantor, agrees to repair or replace, at its option, any part
which fails or is found to be defective during the warranty period.
background
31
background
F20542L EN (031516)
Viking Range, LLC
111 Front Street
Greenwood, Mississippi 38930 USA
(662) 455-1200
For product information,
call 1-888-845-4641
or visit our web site at vikingrange.com in the US or brigade.ca in Canada

Specifications

Indexed Terms: Sealed Burner

Viking VGSC548 Questions and Answers