Loading ...
Loading ...
Loading ...
08
ON/OFF Button
Press to power the air conditioner ON or OFF.
Mode Button
● Press this button to cycle through the following modes. A corresponding logo
indicator on the left side of the remote will be shown.
● a. Cool mode: standard cooling mode. The set temperature and fan speed can
both be adjusted.
b. Dry mode: the unit will run on low speed for dehumidification. The fan speed
cannot be adjusted.
c. Fan Only mode: the air conditioner will not produce cool air, only blow air from
the outside. The fan speed can be adjusted.
+/- Button
● Pressing the “+” or “-” button will increase/decrease the set temperature by 1°F.
Holding the button for 2 seconds will cause the temperature to change rapidly.
Release the button once your desired temperature is reached.
● After pressing the Timer button, each press of the +/- button will increase/
decrease the time by 0.5 hours. Holding the button for 2 seconds will cause the
timer to change rapidly. Release the button once your desired time setting has
been reached.
Fan Button
● Press this button to cycle through the Auto mode and 3 fan speeds (Low,
Medium, High)
1
2
3
4
5
Auto
Speed 1 Speed 2
Speed 3
X-Fan Button
Press this button to toggle the X-Fan mode on or off. The X-Fan operation mode
will keep the fan running at a low speed while the air conditioner is powered off in
order to blow residual water inside the air duct. Pressing the X-Fan button again
will immediately power the fan off.
Loading ...
Loading ...
Loading ...