Loading ...
Loading ...
Loading ...
8
INSTALLATION OF THE HANDLE
This cooler includes two stainless steel handles. To install the handles, please follow the
below instructions:
Pull away the door gasket in the area where the handle is to be installed on the left side as shown
below in Illustration#1. The gasket is easily displaced by hand, no tools are necessary.
Align the handle with the pre-installed screws. Tighten the screws using a Phillips head
screwdriver until the handle sets both flush and secured tightly against the door frame.
(DO NOT over tighten as this will cause damage to the handle assembly).
Replace the door gasket to its original position.
1. Gasket
2. Phillips Head Screw (Pre-installed)
3. Philips Head Screw Driver
4. Handle
Loading ...
Loading ...
Loading ...