Loading ...
Loading ...
Loading ...
Troubleshooting
Pull upwards to remove
the filter.
Remove the filter from
the filter cover. Clean
and rinse it thoroughly.
1Press
2Pull
Cleaning the lint filter
Malfunction phenomenon
1. When I start the washing machine from
the rinsing process, the washing machine
does not produce any water.
2. The washing process changes from
spin to rinse.
3. The control buttons do not work.
4. There is a spin delay.
The washing machine will start with the spin process in
order to spin out any excess water and detergent from the
clothing and then it will pour in water. If there is any water
in the tub it will drain the water from there first.
When your clothing are not evenly distributed or are
bunched up on a single side of the machine, the washing
machine will put in water and will make the clothing
balance even so the device does not shake excessively.
If you want to change the program or water level after the
washing machine has started operation, please touch the
“Start/Pause” button to reset the process.
Reason
The washing machine will delay from 15 to 60 seconds
before entering the spin cycle, after draining the water or
after selecting the spin process, only.
- 11 -
Reinstall the filter.
If there is any damage to
the filter, replace it
immediately.
Loading ...
Loading ...
Loading ...