Loading ...
Loading ...
Loading ...
6
OPERATING
INSTRUCTIONS
1. Always use the slow cooker on a dry, level
work surface.
2. Place ceramic pot in housing base and fill
with ingredients.
3. Fit the lid on the ceramic pot and plug in
the slow cooker. There will be no power
until it is turned on.
4. To turn on and get cooking, press the ON/
OFF button. The button will illuminate red
and will sound one beep. The Clock on
the LCD display will flash (:).
5. Select your desired cooking time up to 24
hours in 30 minute increments. Press and
hold the "+" to increase time or "-" to
decrease time (to reset time to 00:00,
simultaneously press and hold both "+"
and "-" then repeat first part of step 5. to
your new desired time. NB: If no timer is
set in conjunction with a cooking setting,
the selected cooking setting will default to
24 hours.
6. After setting the timer, the LCD display and
ON/OFF button will flash until HIGH, LOW,
SIMMER or WARM is selected - the unit will
beep once and the blue indicator next to
the setting selected will illuminate and any
flashing will become solid. NB: The cooking
mode can be overridden by pressing any
other setting buttons.
7. Once cooking time has expired, the unit will
automatically switch to the WARM setting.
The blue indicator light next to WARM and
will illuminate. The unit will remain on
WARM for 8 hours maximum (this time can
be adjusted at any time). When the WARM
time expires, the unit will beep for 5
seconds and automatically turn off.
8. To turn the slow cooker off manually, press
the ON/OFF button.
9. Lift ceramic pot carefully, using potholders.
CLEANING &
MAINTENANCE
• When not in use, leave unplugged.
• Allow to cool before cleaning.
• All parts except the housing base are
dishwasher safe; ceramic pot, lid and rack.
Alternatively wash with warm sudsy water. If
food is stuck to the surface, fill ceramic pot
with warm soapy water and allow to soak
before cleaning.
• If scouring is necessary, use a nonabrasive
cleanser or liquid detergent with a nylon pad
or brush.
• The housing base may be wiped clean with a
sudsy, non-abrasive cloth or sponge. Be sure
to dry it thoroughly.
• If the feet leave spots wipe the area with a
damp sponge and nonabrasive cleaning
detergent.
• IMPORTANT: To prevent damage to the
appliance do not use alkaline cleaning agents
when cleaning.
• Any other servicing should be performed by
an authorised service representative.
Loading ...