Loading ...
Loading ...
952.019UK User Manual
Controls
Setting up
Before operating the MG-220 megaphone, it will be necessary to load it with 8 x “D” cell batteries.
To access the rear battery compartment, release the lever clip at the top and allow the rear cover to fold
down.
Load the battery holders with 8 x “D” cell batteries with alternating polarities as shown below.
Polarity symbols are imprinted on the inside of the rear cover to help with this.
Alternatively, the MG-220 can be powered by an external 12Vdc source
(such as car battery) connected via a 2.1mm DC jack located between the
pistol grip and rear cover hinge. This jack is covered with a rubber plug for
protection.
The image on the left shows the underside of the rear of the megaphone.
1.
Trigger switch
2.
Siren switch
3.
Push to talk switch (with lock)
4.
Microphone
5.
Volume control edge roller
Loading ...