Loading ...
Loading ...
Loading ...
9
Section 6: Basic Operation
1. Insert one end of the DisplayPort (DP) cable into your PC’s graphics card. An
HDMI cable (not included) can also be used. A DP cable is included for your
convenience.
2. Connect the other end of the cable to the corresponding port on your monitor.
Audio Connector HDMI Ports
Power Connector
DP Ports
3. Connect the power cable to your monitor then connect the other end to your
power source. It is recommended that you use a surge protector with adequate
voltage if a wall outlet cannot be reached directly.
4. Locate the power button on the monitor and press it to turn the monitor on.
AMD FreeSync
This feature is off by default. To activate, you must have a DP or HDMI cable,
and FreeSync-compatible hardware with the latest graphic drivers installed.
After connecting your computer and monitor with a DP or HDMI cable, you may
receive a prompt to enable the feature on your computer. If you do not, you may
need to enable the function in your graphics card menu. See your graphics card
manufacturer’s documentation for instructions.
Section 7: Indicator Light
Indicator Light
Solid blue light indicates power is on and the monitor is operating normally. Flashing
blue light indicates no video source, no horizontal or vertical signal has been
detected or voltage is low. Please ensure your computer is on and all video cables
are fully inserted and/or connected.
Loading ...
Loading ...
Loading ...