Loading ...
Loading ...
Loading ...
14 15
PRODUCT SAFETY WARNINGS
14. Check the blade and motor mounting bolts at
frequent intervals for proper tightness. Also, visually
inspect blade for damage (e.g., bent, cracked, and
worn).
15. Replace the blade if it is bent or cracked. An
unbalanced blade causes vibration that could
damage the motor drive unit or cause personal injury.
16. If the equipment should start to vibrate abnormally,
stop the motor and check immediately for the cause.
Vibration is generally a warning of trouble.
17. The trimmer shall be used to cut stems less than
(28mm) thick.
18. Trim only in daylight or in good articial light.
19. Remove or disconnect battery before servicing,
cleaning, or removing material from the hedge
trimmer.
20. Do not wash with a hose; avoid getting water in
motor and electrical connections.
21. When servicing use only identical replacement parts
listed in this manual. Use of parts which do not meet
the original equipment specications may lead to
improper performance and compromised safety.
22. Follow instructions for lubricating and changing
accessories.
23. Keep handles dry, clean and free from oil and grease.
24. Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If
you loan this tool to someone else, also loan these
instructions to them to prevent misuse of the product
and possible injury.
SYMBOLS
Safety symbols
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them require your careful attention
and full understanding. The symbol warnings do not, by
themselves, eliminate any danger. The instructions and
warnings they give are no substitutes for proper accident
prevention measures.
WARNING: Be sure to read and understand all safety
instructions in this operator’s manual, including all safety
alert symbols such as “DANGER,” “WARNING,” and
“CAUTION” before using this tool. Failure to follow all
instructions listed below may result in electric shock, re
and/or serious personal injury.
SAFETY ALERT SYMBOL
: Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction
with other symbols or pictographs.
Symbol meaning
This page depicts and describes safety symbols that may
appear on this product. Read, understand and follow
all instructions on the machine before attempting to
assemble and operate.
Loading ...
Loading ...
Loading ...