Craftsman 315113082 trim saw

User Manual - Page 6

For 315113082.

PDF File Manual, 22 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Do not abuse cord. Never carry tool by cord or
yank it to disconnect from receptacle. Keep
cord from heat, oil and sharp edges. Following
this rule will reduce the risk of electric shock or fire.
An extension cord should not be used unless
absolutely necessary. Use of improper extension
cord could result in a risk of fire and electric shock.
If extension cord must be used, make sure:
a. That pins on plug of extension cord are the same
number, size and shape as those of plug on
charger.
b. That extension cord is properly wired and in
good electrical condition; and
c. That wire size is large enough for AC ampere
rating of charger as specified below:
Cord Length (Feet) 25' 50' 100'
Cord Size (AWG) 16 16 16
Note: AWG = American Wire Gage
Do not operate charger with a damaged cord or
plug. If damaged, have replaced immediately by
a qualified serviceman. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in
any way; take it to a qualified serviceman.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury.
Do not disassemble charger; take it to a quali-
fied serviceman when service or repair is
required. Incorrect reassembly may result in a
risk of electric shock or fire. Following this rule
will reduce the risk of electric shock, fire, or serious
personal injury.
To reduce the risk of electric shock, unplug
charger from outlet before attempting any
maintenance or cleaning. Turning off controls
will not reduce this risk. Following this rule wilt
reduce the risk of electric shock, fire, or serious
personal injury.
Disconnect charger from power supply when
not in use. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
Save these instructions. Refer to them fre-
quently and use them to instruct others who
may use this tool. If you loan someone this tool,
loan them these instructions also. Following this
rule will reduce the risk of electric shock, fire, or
serious personal injury.
A
WARNING: Some dust created by power
sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known
to cause cancer, birth defects or other reproduc-
tive harm. Some examples of these chemicals
are:
lead from lead-based paints,
crystalline silica from bricks and cement and
other masonry products, and
arsenic and chromium from chemically-treated
lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic par-
ticles.
SAVE THESE INSTRUCTIONS
6
Loading ...
Loading ...
Loading ...