Loading ...
Loading ...
EN
Quick guideQuick guide
WARNING: unplug the dryer during the cleaning and
maintenance procedures.
Cleaning the door lter after each cycle (see Fig. A).
Pull the lter out and clean it by removing the lint from the lter
surface under running water or using a vacuum cleaner. For optimal
performance, dry up the lter before inserting it back in place.
Do not use the dryer without having reinserted the lter in place.
Remove the door lter as described below:
1. Open the door and pull the lter upwards.
2. Open the lter and remove the lint from all its parts. Replace
the lter correctly making sure it is fully seated.
The lter is an essential part for drying. It is intended to
collect the lint formed during the drying process. If the lter
is clogged, the air ow inside the dryer can become seriously
affected: this will increase the drying time and energy
consumption, and could damage the dryer.
Cleaning the tumble dryer
• The external metal, plastic and rubber parts can be cleaned
with a damp cloth.
• At least every two or three months you MUST clean u
build up around the lter housing and the vent tube. Check
the vent tube and any permanent venting xture to make
sure that there has been no accumulation of u or lint.
• Do not use solvents or abrasives.
TRANSPORT AND HANDLING
Never lift the dryer by holding on to its top side.
1. Unplug the dryer.
2. Make sure that the door is properly closed.
3. Disconnect the vent tube from the dryer.
CARE AND MAINTENANCE
DESCRIPTION OF THE TUMBLE DRYER
1. Control panel
2. Door
3. Drum
4. Door lter
A
1
3
4
2
Loading ...