Loading ...
Loading ...
Loading ...
10 | USING THE STAND MIXER
USING THE STAND MIXER
*Included with select models only� Also available as optional accessory�
ATTACHING/REMOVING THE FLAT BEATER, FLEX EDGE BEATER*,
WIRE WHIP, OR DOUGH HOOK
1
To attach accessory: Turn speed
control to “0”� Unplug Stand Mixer�
4
To remove accessory: Repeat steps
1 and 2� Press accessory upward
as far as possible and turn to the
left� Then pull accessory from the
beater shaft�
2
Hold the locking lever in the UNLOCK
position and tilt motor head back�
3
Slip accessory onto beater shaft and
press upward as far as possible� Then,
turn accessory to the right, hooking
accessory over the pin on the shaft�
Book.indb 10 5/4/2018 7:24:26 PM
Loading ...
Loading ...
Loading ...