Loading ...
Loading ...
Loading ...
6
newair.com
INSTALLATION
Before connecting the appliance to a power source, let it stand
upright for approximately 24 hours. This will reduce the
possibility of a malfunction in the cooling system from handling
during transportation.
Before operating your wine cooler for the first time, follow these steps:
• Remove the exterior and interior packing.
• Clean the interior surface of the unit with lukewarm water and a soft cloth.
• Place the cooler on a level surface that will be strong enough to support the
unit when it is fully loaded. To level your cooler, adjust the front feet
located at the bottom of the unit.
DOOR HANDLE ASSEMBLY
Tools Required for Assembly: Phillips screwdriver (not included)
Estimated Assembly Time: 5 minutes
Before installation, attach the handle to the front of the unit with the included
screws. It may be necessary to push aside the rubber seal on the inside of the
door to reveal the screw holes. Caution: Avoid over-tightening the screws, or
you may cause damage to the unit.
REVERSING THE DOOR SWING
The door hinge is on the left side by default. If you wish to reverse the
swing so that the door opens from the right, it is important to have at least one
other person to help. It is dangerous to try to reverse the door swing by yourself.
1. Unscrew the upper door hinge while the second person supports the door.
2. Remove the upper hinge and carefully lift the door off the bottom hinge.
3. Unscrew the bottom hinge and install it on the left side of the unit.
4. Flip the door around so that the handle is on the right side and slip the door
over the bottom hinge.
5. Reattach the door by screwing the top hinge into the holes provided on the
upper left surface of the unit. Make adjustments as necessary to be sure the
door is aligned properly.
Loading ...
Loading ...
Loading ...